Counting matching models…
Sonos Beam Mount for Apple Studio Display (height-adjustable stand) A one-piece bracket that hooks into the cable slot of the Apple Studio Display's tilt- and height-adjustable stand and holds a Sonos Beam (Gen 1) right below the display.…
Tube/beam with a cool geometric pattern. Originally intended for diffusing LEDs Print it in vase mode with a brim to make a hollow tube. I suggest you increase the extrusion width to 0.6mm for a standard 0.4mm nozzle to get a stronger…
Second variation of a Tube/beam with a cool geometric pattern. Originally intended for diffusing LEDs Scale by 200% Print it in vase mode with a brim to make a hollow tube. I suggest you increase the extrusion width to 0.6mm for a…
Small stand with upward tilt to help with projection! (~8.5 degrees) Total height with Sonos beam on board is 105mm. ~20mm gap height in the rear. ~38mm gap height in the front.
This is a 3x2 beam bracket that allows Lego Technic arms and parts to change 90 degrees. It's useful for building Botball robots when a sensor needs to point down or some part needs to change directions on your model. It can be printed in…
These are angled external handles that fit all BeamCase variants that use the simple chamfered case panels (the default ones). These handles are very sturdy, and also act as bumpers for the case to protect it. There are two versions of…
https://youtu.be/s_dC-w5gyA0?si=XXUXzHBmlcngIpb- please do post pictures of makes and remixes i would love to see them and also please tell me if theres any modifications i should make for durability or handling. 2212 motor, 120 A esc, 9g…
The application of this gadget is so versatile - you can use it anywhere. Attach it to anything using hot glue: Knifes - so you can see what you are knifing (not legal advice) Phones - so you can feel like a professional photographer, or…
5 print pieces to make 1/16th of a 500 mm circle of beam for the Disney monorail model. The parts can be assembled with epoxy (best but most work), hot glue, or CA adhesive. The joints are precise but can be improved with…
The picture shows a PTFE tube attached along which the filament is brought from the spool holders below the printer. On the other side of the printer, I run the LED light cable up along the cable rail. Two different versions for both…
This is to mount the 8 Gang Auxbeam control panel over head on the chev or GMC trucks 2024
Cubcar Auxbeam 6 gang mount 42 mm clamp works for the auxbeam 6 gang control box M8 Threaded holes Might need to clean them with a tap
This model fits over the top element of a 7m Spiderbeam mast, has zip-tie holes for a toroid and strain relief holes for the antenna wires. The large holes fit a straight BNC connector, with the hole on the other side supporting a third…
v3 is inclined at 32 degrees. The hole diameter was adjusted, too. v2 is inlcined at 25 degrees. ------------- This model can hold a mini beamer, in my case a YOTON Y3, at an angle of 25 degrees. It projects the image onto the ceiling so…
Apple tv remote holder with MakerBeam added on the back.
The NeoPixel Beam Holder allows you to attach an Addressable RGB LED Strip (commonly referred to as a "NeoPixel Strip") using LEGO Technic Pins. There are two versions, one that mounts the NeoPixel Strip on the top and one that mounts it…
These are longer panels for BeamCase Sandwich V3.0 with 15x15 Aluminium profiles that are between 300mm and 360mm long. The panels come with and without integrated handle, as well as version that are split along the length or one piece…
Simple beam blocker. Three versions: To be placed in a post holder Free standing with a place for a 10x2 round magnet. Free standing with a magnet and a scale The scale can be printed as a negative volume or from a different color…
STL files for monorail beam compatible with Disney HO monorails: 500 mm radius, 300 mm radius, straights, pylons Newer monorails with operating doors require coupler modification to run on the smaller radius curves. Older models should…
Made the model a bit easier to print. Also carved out space for GPS. Stands better on its bottom so you can have usb cable connected. Cover slides a bit better. Great model from original author, thanks for sharing.
Beam interlocking has a bug where it will bridge the gap created in print in place hinges.
Someone on reddit asked why there was not much holding together the top of a multiboard container made with beams. I've used beams on top instead of just the corner pieces before, but why sacrifice space on that top opening. Lacking most…
Detailed Description: This rod compass is a practical tool for marking large circles on wood, metal, or plastic. It clamps onto a profile such as a wooden strip or a spirit level and allows diameters from approx. 85 mm up to over 4000 mm…
This is my design for a beamer holder intended for a bed frame. It can be mounted easily without the need for screws or tools. The model incorporates a bearing with a rotating base, allowing the beamer to be positioned in eight discrete…
Wire clip to organize cables in 1515 extrusion (makerbeam XL model). This extrusion type is used in Voron V0.2. Print with 6 walls !
I needed a mount for my table to secure a wooden bar for later HSW attachment to it. So I modeled the mount. included .stl and .blend files
Full Length 7 block C-Beam. Made without physical reference of original part but visually seems to match the original. with the right settings, prints in almost half the time of a full size normal beam!
Compact Console for Beamer/Touchscreen/Bible/... with integrated Pi/Waveshare Adapter/Powersupply -12cm Fan (optional) -12mm Powerbutton (optional) -Meanwell LRS-35-5 (Pi4) or LRS-50-5 (Pi5) Powersupply (optional) -2.5x5 screws (8x) for…
Print on the backside, so the strenght of the holders is not compromised, with supports and brim. Not a perfect recreation in terms of visuals, but it works.
An upper and lower collar for a SpiderBeam 12m mast. v2 holes are enlarged to better fit the carabiners I have.
This model is compatible with the lego system.
These are simple but effective beams for mounting any Modular Mounting System, GoPro, or other compatible components. This pack includes a number of common sizes, some with angled or straight connectors. I've also included an axis…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Add a 1/4 20 bolt and wingnut to mount a yagi to your mast. Slides on the end of the sixth section of a Sotabeams carbon 6 mast (78" tall when fully extended)
This is a heavy-duty, versatile mounting adapter for the Ubiquiti U7 Pro . It adapts the standard twist-lock mount to work with industrial or temporary setups, perfect for warehouses, temporary events, or labs. Mounting Options: Center…
These are the slide in fan brackets for the BeamCase system. These brackets slide into the aluminium profiles and instead of being screwed to nuts in the profiles which makes them simpler than the other options, but they need to be added…
I made a custom fat Pikachu front panel for my BeamCase SW print There are three options in the file: - Pikachu with no power button hole - Pikachu with power button hole in the lower part. This will fit the original frame as well,…
I modified my BeamCase SW to use an HDPlex GaN 250W unit embedded in the front panel of the case, and I made this 3D-printed makerbeam replacement to get the case length down to 225mm total length (reduction of 95mm) by using 205mm long…
Here's A Simple Laser Beam Dump I Made! This One Is Fully 3D Printed, So No Need Of Extra Parts And Assembling! The 5W Blue Laser Shown In The Pictures Makes The Beam Dump Smoke. Its Partly Because I Used PETG For The Prototype And Its…
After printing the originals "unmeshed" the model and created a Heart Shaped tray, tested and works fine
This mounting beam has a 24mm BAM (Ball Articulating Mount - I'm coining this term here lol) clamp at one end and Modular Mounting System F-tabs at the other end. It is compatible with my quick release BAM tube mount , and theoretically…
This mounting beam has a 24mm BAM (Ball Articulating Mount) ball at one end and Modular Mounting System M-tabs at the other end. It is compatible with my Configurable 24mm BAM Clamp to Modular Mounting System Beam and theoretically any…
EN: Check the Infinity Cube article on BitBeam's official page for assembly instructions. CZ: Návod k sestavení najdete v článku o nekonečné kostce na oficiálních stránkách BitBeam.
Screwless BitBeam cases for RCW-0001 and HC-SR04 ultrasonic sensors. For more information about BitBeam, visit the official website .
Smaller case for the Dualbeam 2 868,3Mhz Homematic IP antenna from stall.biz The antenna PCB just slides in. Use the plugs to cover the slots for the sma sockets. For command strip/powerstrip mounting. Step file included. Antenna:…
Very simple bracket that fits the Ikea Skorva mid beam used in my van conversion to prevent slats moving. printed in PLA at 0.2 layer height I would increase wall count to at least 5 infill 10%
This is a shoe ornament designed to look like the beam from the VEX IQ game Mix and Match. The button that actually goes into the shoe is not printed. I got it off amazon. I printed it in PLA, for more resistance to heat I would recommend…
This is a necklace pendant designed to look like the beam from the VEX IQ game Mix and Match.
I had a pair of O Scale Fast Track Earthen Bumpers from Lionel. But for as long as I've had them, they've not had the little wooden pieces. I didn't even realize that they were missing until the bumpers started having issues this year! 3D…
Basically designed this to hang from a beam clamp via threaded rod. I am uploaded three versions, one with threaded inserts for the plate itself, one that just relies on the whiz nuts included with the AP (same design as Mauricio's) and…
Created for Liquid Stands Z-Style Stand , but should be compatible with any similarly generic support beams (36x36mm). Print Settings Can be printed with any setting. Optimized recommendation configuration provided below. Nozzle: 0.6mm…
This model is compatible with the lego system.
2x m3 nuts and bolts to match the AP mounting plate to the beam holder and one m5 bolt to squeeze the tensioner.
Please like model, if you are satisfied. EN: Template for drilling 80x80 beams for assembling raised garden beds. The corner holes are intended for the base (first layer of beams). The holes in the middle are intended for drilling through…
This is a beam zipper pull designed to look like the VEX IQ Mix and Match beam. It uses a metal clip that I have linked below. https://www.amazon.com/dp/B0DCVX1V7B?ref=ppx_yo2ov_dt_b_fed_asin_title
A mount for a DARKBEAM 365nm UV Flashlight A hole is provided for a 1/4"-20 Threaded Insert to mount to a tripod. The insert is made for Wood Furniture and is not heat-set. The flashlight can be found at: https://a.co/d/06NMczS0 The…
End cap replacements for both ends of the SOTABeams 10m travel mast. These are designed to be printed in TPU95, but they can probably also be printed in other strong flexibles. Solid materials such as PLA and PETG will not work. I printed…
I built a ball counter for the 2026 FRC robotics game "Rebuilt". The frame has 4 openings where the balls roll through and are counted. On each side of each opening there is an IR emitter and an IR sensor. I drilled holes through poplar…
Designed originally for the Ender 5, but it can be used in other printers with this type of v-slot beam. It can be attached with M3 or M4 T-nuts. The double version is to be attached in a double beam, like the ender 5 has and the single…
Modified F1 & F2 Beam 5 with angeled exits PC4-M10 and no passthrough on bottom. My drybox sit on the shelf above my printer so I relocated front exits to reduce friction and better operability
This is version 2 of the 2 Fans Mount for the BeamCaseSFF with mounts for 120mm and 140mm fans. -Depending on the orientation of your case, these are either top or bottom case fans mount. they are especially put on the same side as the…
During the first use of my LilyGo T-Beam 1W, the "locking pin" on the my original battery tray broke - thus not retaining the battery anymore. So I redesigned the tray to be the full length of a battery and added two additional locking…
Français : Un cache avec le logo de BeamNG.drive pour la pompe Elite Liquid de Cooler Master. English : A cover for the Cooler Master's Elite Liquid Series AIO Pump with the BeamNG.drive's logo.
Acerbis Elba Adapter Bracket to Hold LG885 Low/Hi beam headlight
The multicolor is white with orange and black.
Auxbeam Switch Panel Lables / Stickers Works well with backlight and maintains an original-ish look. Photo is on AC-1200 with mixed original stickers and printed stickers. I recommend edit the f3d file with the text / logo you like, and…
I made a clamp, compatible to: which fits 25mm Beams.
n'oubliez pas de poster vos photos de vos prints ça fait toujours plaisir !
My kids broke the cover of one of the sockets, so I had to design a replacement. The hinges are under a bit of stress, so print it with some durable material. I've printed mine with PC, but I assume PETG should work too. For removing the…
https://www.thingiverse.com/thing:6349320
System of beams, brackets and servo fittings to build stuff using standard M3 screws. Print beams laying down in two parts that snap together, can be assembled into longer pieces. Brackets for corners and angles and adapters for servos…
BeamCase is a system that allows you to create your own case with the combination of 3d prints and Makerbeam XL profiles (or similar 15x15 aluminum extrusions). Beamcase SFF is a system optimized towards compact builds with good cooling…
Needed a few different options for mounting 3mm panels on my BoxZero build. Both slide in and screw in options depending on how stiff a hold you need for the mount. Holes are sized for M3 screws - was designed to go with No Drop Nut for…
EDIT: I would no longer recommend the inserts provided here, I would recommend cloakedwayne's official inserts here: Better CF Tube Mounting the xy joints are still useful if you want to keep using the stock gantry, and don't want pin…
The groove allows you to position the PTFE Connectors wherever you like. Also as my drybox is high up, I created the housing for the humidity captor on the facing part.
BeamCase is a system theat allows you to create your own case with the combination of 3d prints and Makerbeam XL profiles (or similar 15x15 aluminium extrusions). BeamCase (m)ATX is a system optimized towards compact builds with full size…
I always hated the options for mounting the Auxbeam panel. This design is meant to mount flush with your dashboard. It requires you to cut the shape out of your dash wherever you want it mounted. The face snaps on to the bracket to hide…
Simple holders I had to make after originals broke. There’s f3d file with parametrized design so the model can be easily tweaked to a particular LED beam size. (updated 05.03.2026 with optimized parametric design). Included stl come in…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
The Sunbeam EM0480 coffee grinder has bulk grind adjustment achieved through adding shims under the burr attached to the motor. They come in 0.25mm increments but they leave a small gap under the burr which can trap fine grinds. If you…
The default 19-20mm for C1 and C2 weren't easy to source in my area so modified these beam holders to fit a ¾" pipe standard. Dec 10, 2024: Also added the modified crossbeam from 702217 to fit ¾" pipe if you intend to use the spool winder…
Hello here is a universal box for Lilygo T-beam cards. Some short tests with water projection and immersion. The box resists well, no trace of water in the case. with sma or ipex plug for the T-beam , sma plug output. 25x25 gps antenna ,…
Hello here is a small box for Lilygo T-beam cards. For this card LoRa GNSS NEO-M8N and NEO-6M card in ipex. Some short tests with water projection and immersion. The box resists well, no trace of water in the case. Only with ipex plug for…
Small jig for soldering the OLED screen to a t-beam for use with Patrick Walsh's case.
If you run out of 3mm nuts and bolts, or you're just noodling around, or if you want a basis to attach other things to your extrusions. You could knock out similar designs in half an hour, but now you don't have to. Should print without…
I wanted to attach a Wyze Pan v3 to the beam in my kitchen so I could watch my bird feeder on the window. I built this with machining tolerances in mind and had some issues with getting the screw to run smoothly so I would recommend…
![[partially deprecated] CARBON TIME cf x beam parts for voron 2.4](https://media.printables.com/media/prints/813096/images/6285656_be049c92-0559-4229-9a8a-1324d631045c_e1591564-131b-44cf-999f-1c9532482314/20240320_155358.jpg)
