Case for TTGO T-Beam V1.1 (RDZsonde) with 2.0 TFT Display
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.92 – €1.12 net (excluding VAT)
For file: PRUSA_RDZsonde-Lid-0.2mm_PLA_MINI_1h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.02 excluding VAT (range midpoint).
- Weight reported by the author
- 13 g
- Print time reported by the author
- 1.01 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a upgraded Case for the TTGO T-Team RDZSone tracker board with 2.0 TFT Display.
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 595
- Makes
- 3
- Views
- 4,497
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a upgraded Case for the TTGO T-Team RDZSone tracker board with a 2.0 TFT Display.
Print instructions
Parts
- 1x LILYGO® TTGO T-Beam V1.1 ESP32 433 Mhz WiFi Bluetooth GPS
- 1x 2.0" ILI9225 SPI TFT/LCD
- 4x M2.5x10mm Flat Head Hex Screws
Assembly
- Print parts
- Remove support from lid
- Connect display and board with cables
- VCC to 3.3V
- GND to GND
- SDA to 4
- CLK to 13
- RST to 14
- RS to 2
- CS to 0
- Close lid with the the flat head hex screws
- Flash Firmware. You can find detailled installation instructures for binary images at http://rdzsonde.mooo.com
Links
Some of the links to AliExpress are advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.
Credits
This is a remix of TTGO case for 2 inch TFT and SoftRF case v5 (for TTGO T-Beam). I fixed some problems with the buttons and optimized the lid.