Counting matching models…
Snap-together case (no hardware) for this board. Features a window for ePaper display, switch, USB port, and detents for the boards 4 buttons. http://www.lilygo.cn/prod_view.aspx?TypeId=50031&Id=1169&FId=t3:50031:3 My Github repo for…
**You can purchase this case and others already printed: ** US customers can purchase from QuantumShadow3D: ( https://www.etsy.com/shop/QuantumShadow3D ) UK/EU customers can purchase from 3DChicken: ( https://www.3dchicken.co.uk ) These…
That's a case for the famous LILYGO T3 LoRa device, with room for a standard 3.6v LiPo battery. No screws needed, you can just print it and close it with the device inside. No supports required. PETG is better but PLA also works well.
This is my attempt at a case for the TTGO T-Beam. I wanted something with a different style than the rugged and utilitarian cases out there. This is inspired by Portal, Sci-Fi concept art, and a little bit of Cassette Futurism. CAD on…
TTGO Lora32 T3 Slimline Case This case fits both 433mhz and 868mhz versions of the boards marked T3_V1.6.1. I have both running on the home IOT. I've included a picture of the boards I have as there are a confusing amount of different…
Enclosure for the LilyGo TTGO T-Display ESP32 development board. The enclosure provides two button levers that will activate the board buttons, a port for the USB C connector, a recessed leaver for the reset button on the board. It also…
Requires eight 12mm M2 self tapping screws to assemble. It's recommend to seperate the parts in your slicer. If you print it as-is they'll stick together. T-Beam_Supreme_midframe_buttons_update1.3mf contains some updates that make the…
Summary This enclosure is designed for the TTGO T-Display ESP32 boards with a 1.14" LCD screen. It ensures that the USB-C cable can be yank out without pulling out the board, press the buttons without fear of breakage. Includes space for…
This is a rugged case for your Meshtastic TTGO T-Beam device with SMA antenna plug. I printed this using Overture PETG with 4 outer walls and 25% infil with the Prusament PETG settings. Use a dab of silicon grease on the switch cover for…
Modified Lilygo TTGO Lora case to include 1000mAh or 2000mAh batteries. In the future I'll include a place for a switch, as currently is always on, and the Meshtastic version for Lilygo TTGO Lora is not going to sleep when disconnecting…
If you LIKE this model PLEASE hit so I get credit, this will encourage me to make more models like this, thanks! Case for the LILYGO LoRa32 V2.1_1.6 Board and 18650 LiPo Battery. I used this is for the MySondy GO Project:…
This is a upgraded Case for the TTGO T-Team RDZSone tracker board with a 2.0 TFT Display. Print instructions Parts 1x LILYGO® TTGO T-Beam V1.1 ESP32 433 Mhz WiFi Bluetooth GPS 1x 2.0" ILI9225 SPI TFT/LCD 4x M2.5x10mm Flat Head Hex Screws…
This is a remix of tpatrickwalsh's TTGO T-beam v1.1 (and v1.0) case ( https://www.thingiverse.com/thing:4753247 ), modified to fit the bigger GPS antennas for better reception. I have found that the bigger antenna is a must, as the…
Remix to allow an 18650 battery in a suitable holder to be accommodated in the back of the case
Only a few enclosures for the T-Beam TTGO LORA boards out there, and I didn't find any that were designed for the larger 1.3" OLED display. Here's my version. This one allows for button and USB access. Lid snaps into place and is held…
I was unable to find a CAD model for this specific TTGO module so I made my own. The dimensions and the placements of the components should be fairly accurate but there could be a slight difference. If you've got any questions or…
This is a remix of the thingiverse model with more space for the battery and a few little modifications. Most of the modifications where done in PrusaSlicer and can easily be modified. I also changed the size of the holes for the magnets…
An enclosure for the LILYGO Meshtastic T-Beam ESP32 TTGO Development Board with LCD and rear mounted 18650 battery mount. Requires four (4) 16mm M2 screws. OpenSCAD file requires BOSL2 (https://github.com/BelfrySCAD/BOSL2) and nutsnbolts…
This is a rugged case for your LORA-Aprs TTGO T-Beam device with SMA antenna plug. Thanks to Breeki for permission to remix and publish. I modified his great work and added clearance for the printed circuit board so that each version…
may be used with rdzsonde, meshtastic and others while hiking, to fix it securely to the vest/belt/backpack.
Snap-fit case for TTGO T-Display
I designed the model to be able to be printed on its back without supports. Here is a link to the battery that I used https://www.aliexpress.us/item/3256802096150819.html. You can see from the pictures that it does have the same snug fit…
Fits https://www.aliexpress.com/item/4001178678568.html Secure the lid with four M2 x 10mm machine screws Helps to print supports just to support the edges of the back of the case.
simple case that fits a slim battery and some sensors you might want to have if you need to customize https://a360.co/4poeBnF (2026-01-03 fixed the link) Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes…
This is a fully 3D printable enclosure for the LilyGo TTGO LoRa32 board used in Meshtastic nodes. The enclosure provides internal space for a battery and supports the use of the board’s native antenna connector. The slide switch and reset…
Case for the LILYGO TTGO T-Call v1.4 (ESP32 + SIM800L module; see e.g. here: https://de.aliexpress.com/item/33045221960.html ) and antenna (see e.g. here: https://de.aliexpress.com/item/32474525425.html ). The hole to mount the antenna…
A small bare-bones case for your Meshtastic TTGO T-Beam device with SMA antenna plug. It does not require any additional mounting hardware. Printed with 5% infill . The little pegs are a little flimsy and could be replaced by nails/screws…
Stand for the great LilyGo TTGO T-Display Enclosure by uzer66 . https://www.tinkercad.com/things/kNHjWwaoVol
The case by thekwijibo has a few nice features missing from the other models on thingiverse... access to the buttons/USB, a case that allows for "tilted table operation", and it aligned properly with my asymmetrical antenna board.…
Remixed to remove text. Category: Electronics
Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it sleep, the battery will last several months (this board uses 0.3 mA on sleep). The USB-C and reset are available thru the…
This is a work-in-progress version of a case for the TTGO T-Camera PCB. At the moment the board needs to be fixed inside the case with hot glue. This will be fixed in the final version. There is also space for a li-po/li-on battery. In my…
As the TTGO T-CALL is a little fragile I build a casing for it, also with space for a lipo battery on the middle layer. It works perfectly the only thing to add is TTGO T-CALL and a battery, the USB cable fits perfectly on the side. Once…
Ich habe passend zum Gehäuse eine Fensterhalterung konstruiert. Passend für dieses Gehäuse: https://www.thingiverse.com/thing:4797115 Diese Saugnäpfe habe ich verwendet: https://amzn.to/48ASWkn Das Gehäuse kann stehend ohne Stützen…
Enclosure for TTGO T-Display ESP32 MCU for 3D print and STEP file for customizations Original design by LilyGO wasn't suitable for easy print and needed some improvements. So I made it from scratch following the original look. This design…
BOM: 2x M3 x 5 x 4mm heat set insert 2x M3 2x M2 x 4mm SHCS
Enclosure for TTGO T7 ESP32 Board and a LiPo battery Designed for portable use of the TTGO-T7 ESP32 development board. I recommend supports for the clips on the part that holds the ESP32 and slides into the case. Fits into a trouser…
This project was developed for a Lilygo T-Display with the aim of being used as a hardwallet in conjunction with the Blockstream JADE open source project. My goal is to raise a fund to create an online course for bitcoiners who want to be…
Case for LILYGO® TTGO VGA32 V1.4 Controller you will need the LILYGO® TTGO VGA32 V1.4 Controller…
Cool case for your NerdMiner running on a LilyGo T-Display. This is my very first design ever! It's a tight so be careful not to break the reset button on your T-Display. Model doesn't require any screws.
The TTGO LoRa32 from LilyGO is a microcontroller based on an ESP32 with a built-in LoRa chip and an OLED display. The USB to serial converter makes it easy to program, even as an Arduino. The board has a micro USB connection with which it…
Changed the design of the main housing a little. Added a hole in order to see the status LED, if configured. Furthermore the Display cutout was increased and moved a little. Otherwise the screen contents are not readable (depends, which…
I remixed the model so it fits when an OLED display is soldered directly to the board pins. Changed the diameter of the screw holes so that 3mm screws can be used. Added spacers for greater stability. I printed the front with the display…
Remixed version of Firepower's TTGO VGA32 case.
Print without support. Box and lid
Una carcasa para el TTGO T-Beam, remixeado de @Breeki Hardware: 4x M3x20 2x M3x10 4x CM2x4 2mm screws
TTGO T-Beam v1.0 Enclosure This is an enclosure for the TTGO T-Beam with OLED version 1.0. All credit goes to the SoftRF project for the original design. Remixed features This enclosure has been generalized for use outside of the SoftRF…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gm3oIDjlAjH An enclosure for the TTGO T-Display development board featuring the ESP32 microcontroller with wifi, bluetooth, a battery charger and a TFT…
Snap-fit case for TTGO LoRa32v1. Tested for version 1 of the device. The case is snap-fit so its better to print it from less brittle material... e.g. PETG.
TTGO VGA32 V1.4 Case with access to all ports and switches uses 4 x M3 screws Remix of https://www.thingiverse.com/thing:4565213 Print Settings Printer: Geeetech 3in1 E3D V6 Rafts: No Supports: No Resolution: 0.2 Infill: No Filament:…
Window/Wall Suction Cup TTGO T-Beam case, for putting in the Enclosure designed by thekwijibo. There shouldnt be any reason you cant use screws in place of suction cups, if you wanted to attach this to brick/wood. Suction cups used:…
This is a ultra slim case for the ESP32 - TTGO The PCB is secured with a slot for it and a holder from its battery connector. The lid snaps on. Enjoy!
Case for LilyGO TTGO LoRa32 without battery compartment. Currently needs glue or elastic bands to stay close.
The idea behind this case was to create something minimal, sturdy and without any fasteners. The T-Beam is aligned with the case through the use of a brace below the PCB, which locks it into place on the mounts so that there's no sliding…
Case for LilyGO TTGO T3_V1.6.1
This design mounts module using 5-10mm stands with M3 screws.
Build your own GPS LoRaWAN Tracker. This housing is handy and suitable for the TTGO T-Beam Board (rev0.9 and rev1.0) Choose a top and a body from the matching parts for your board version. Depending on the placement of the antenna choose…
Full instructions for sourcing parts and assembling the radio can be found at https://libretactical.com/pages/atak-mesh-build-instructions. An assembled, programmed, and ready-to-go meshtastic node using this case can be purchased at…
All parts should be printable using 0.2mm. Buttons can be printed using 0.15mm layer. The fridge mount and the back part require plate support material. The front part and buttons can be printer without support. Tested with Generinc PLA /…
Box for the esp32 assembled by lilygo model ttgo t3. This casing allows you to have a recycled vaper battery to maintain autonomy time. It also leaves the space free for the charging connectors, the power switch and the reset button.
More to be added, display clips into a holder (surround.stl) which offers some protection and insulation by itself, the slide can then slide into either the close_slide which completely encapsulates the device or one with full access to…
I wanted a case that was small, easy to print and easy to assemble with two dabs of super-glue. So I made this. I hope it is useful to others. Also check out my open source project . Print instructions Category: Electronics
A simple housing for LILYGO® TTGO T5 V2.0 WiFi Wireless Module bluetooth ESP32 2.13 e-Paper Display Development Board…
I only made this case, original build instructions are here https://emariete.com/en/meter-co2-gadget/
I basically just took the original model and made it fit my larger antenna. After that I just kept making small changes until I was happy with it. Everything fits really well now and looks a little bit neater. I wanted something with the…
--- SHOULD BE CONSIDERED AS A WORK IN PROGRESS --- Made this 3D-printed housing for a TTGO T-Camera ESP32 module to work as a video doorbell for use in Home Assistant. Also fits a 12 mm illuminated push button, that can be wired to the…
I wanted a base so that the device doesn't slide around in the car. It is a little tight ( as can be sen in the lower left of the pics) so you may want to expand it a bit length ways by about 3% or so in your slicer before printing.
TTGO T-Display LiPo Case V2 Update I was not happy with the results of how the 2 parts snap in place so a redesigned it to lock with M2x8mm hex screws This is a case for the TTGO T-Dislpay that fits a 503035 Lipo Battaery 600mah. Designed…
Designed to not require screws and so so no screw posts or bosses within the case. Antenna socket space in the clear. Flexible assignement of the USB cable port to allow for different plug designs.…
This is a ttgo case. It feature a window for the display, buttons, and is articulated and print in place. The provided openscad source can be adjusted for some ttgo that have a slightly misaligned display.
A case for the TTGO Lora32 which makes it a more useful portable device, with the intention of using it as a pager. It has three buttons on 12.7mm centres (can be done on perfboard), space for up to a 40 x 60mm LiPo and a 9.6mm piezo…
TTGO T-PCIE with SIM7000G module: I was not able to find any CAD models for these two lilygo modules so I created my own. I had to measure everything myself which might have caused some inaccuracies in the placement of the components or…
3d printed housing for TTGO LoRa32 V1.6. The model was printed with a 0.4mm nozzle, ABS carbon plastic. List of hardware: Battery 603035, 700mAh Din912 m2*5 - 2 pcs. Din912 M2.5*6 - 4 pcs. Insert nut m2*3*5 - 2 pcs. Insert nut m2.5*4*5 -…
just another case for the TTGO T-Beam Version 10 (1.0) used for mapping of the TTN key features: designed for v10 revision (position of lora-antenna connector changed) tool-less installation of the lid, the lid snaps in to place and fix…
A case for the TTGO T4 v1.3 ESP32 development board. Only two of three buttons are available as the remaining one is also connected to an internal sensor and therefore not fully usable as user button. Furthermore, boot and reset switches…
A stylish(ish) case for the small/cheap eink board from TTGO. Also - check out my open source project for these devices. Print instructions Category: Electronics
This is an enclosure for the "TTGO" style of ESP32 OLED board. It is designed to be secured with 4x M3 square nuts & 4x M3 16mm bolts. This enclosure was originally designed for the TiltBridge project but should work with any project that…
TTGO-Display case without buttons. Screws:
I did not need the pin holes in the backside of the case, so I removed them.
ttgo t camera Casing woth big doorbell option
Added a battery holder for 103565 3000mah battery. Its friction fit. "Fixed" by screwing in antenna. Holds pretty well. You can add some foam between battery and the case, if tolerances are too big. My first model, I was learning in the…
Lid is modified to cover the TFT/LCD and fixed antenna hole. Base has been reinforced at the bottom. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.4 Infill: 15% Filament: Prusament PLA BLACK…
Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards Print instructions Category: Parts Summary Modified OLED front to allow for more rectangular inexpensive 0.96" OLED boards Print Settings Printer Brand:…
Case for LilyGO TTGO T3_V1.6 designed to be mounted on a wall of my camper-van There is a place for fixing a micro step-down module with double-sided adhesive tape. It can be powered by a car battery. There is also a hole for the cable…
Minimal two part case for a TTGO Esp32 development board. Still work in progress, had removed two of the buttons for another project. Will update model when new board arrives here. Mounting holes for the screws are designed in a way that…
Single part enclosure for TTGO's T-Display board. Mounts by latching to PCB, covering top side of the board. Has 2 buttons over user switches, and a button over reset switch in side. Integrated supports and mouse ears version (-SUP.STEP)…
I picked up an ISDT BattGo BG-8S Battery meter and wanted a way to mount it on the battery so I designed a case for it. This is meant for a SLM24 LIFEPO4 24V 50A 8S 1200WH BATTERY from JAG35.com…
It's a remix from Alexandr IDK (thingiverse) i just add a small hole to pass a lanyard and attached it to the checker. Post your makes!
Looks good in woodfill PLA. Ver 2 just posted, it has a hoop for mounting and space inside for a 600mah lipo. Also - check out my open source project for these devices. Print instructions Category: Electronics
A case, which holds my TTGO T5s 2.7" eInk display. Below can be stored a 18650 battery ( with a single battery clip holder ) and there is still space for a 433mHz sender ( XY-FST ). The buttons are very fragile, when the lid is not…
A case for the TTGO T5 and the wide/short 2.9" e-ink screen. Print instructions Category: Gadgets
The original piece had a single magnet in the middle of the mount part. On our fridge the display has a tendency to pivot so I added smaller 12mm diameter 2mm height magnets on the left and right.
Unfortunately my screen was misaligned, and the protruding frame of the original design chipped the corner of my OLED causing an interesting interlaced effect.
Shortened middle part
I liked the original case but my antenna is much bigger than the default one, so i used the opportunity to make it thicker (so that the batteries fit) also add a second battery(wich works sort of like an handle), these are the battery…
Remix of no need for M2 heated thread inserts, use M2x8 or M2x10 self tapping screws back is flat and easier to print case is smaller ( ~13mm )
Recessed the reset button so it is flush with the case to prevent accidental pressing. Fits original model https://www.printables.com/model/158261-ttgo-v2-lora-with-buttons-and-13-oled-enclosure
There is a case with top cover for my project with TTGO T-Call
Now you can leave the battery inside.
