TTGO T-Display ESP32 stand with battery case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 178
- Makes
- 1
- Views
- 1,693
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it sleep, the battery will last several months (this board uses 0.3 mA on sleep). The USB-C and reset are available thru the case. No need for glue or anything, everything just fits snuggly.
NOTE: If your battery has a JST 1.25 connector already, check the polarity carefully with the cable included in the TTGO board.
Parts
*TTGO ESP32 T-DISPLAY: https://s.click.aliexpress.com/e/_ADirut *Battery: https://s.click.aliexpress.com/e/_AonIrT
Software options
- Flight radar: https://github.com/rzeldent/esp32-flightradar24-ttgo
- Clock: https://github.com/kd8bxp/Cheerlights_Clock
Print Settings
Printer:
prusa i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament:
eSun PLA
Notes:
For the buttons you have 2 options, one is flat (button_on.stl) and the other one is rounded and easier to press. Just place the buttons in position and slide the board inside, match the USB-C port.
The cover.stl should held everything in place if you close it properly. Add padding if your battery is smaller than the recommended one.Category: Electronics