TTGO T-Display ESP32 stand with battery case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it…
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 178
- Wydruki
- 1
- Wyświetlenia
- 1698
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Little stand for the TTGO esp32 board with the little lcd display. Fits a 504045 lipo battery inside. If you make it sleep, the battery will last several months (this board uses 0.3 mA on sleep). The USB-C and reset are available thru the case. No need for glue or anything, everything just fits snuggly.
NOTE: If your battery has a JST 1.25 connector already, check the polarity carefully with the cable included in the TTGO board.
Parts
*TTGO ESP32 T-DISPLAY: https://s.click.aliexpress.com/e/_ADirut *Battery: https://s.click.aliexpress.com/e/_AonIrT
Software options
- Flight radar: https://github.com/rzeldent/esp32-flightradar24-ttgo
- Clock: https://github.com/kd8bxp/Cheerlights_Clock
Print Settings
Printer:
prusa i3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
50
Filament:
eSun PLA
Notes:
For the buttons you have 2 options, one is flat (button_on.stl) and the other one is rounded and easier to press. Just place the buttons in position and slide the board inside, match the USB-C port.
The cover.stl should held everything in place if you close it properly. Add padding if your battery is smaller than the recommended one.Category: Electronics