Lilygo ttgo t3 v1.6.1 double 18650 battery case (+ bigger antenna hole and sdcard slot)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
case for the lilygo board and 2 18650 (or any battery holder with the same footprint)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 22
- Makes
- 0
- Views
- 324
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I liked the original case but my antenna is much bigger than the default one, so i used the opportunity to make it thicker (so that the batteries fit) also add a second battery(wich works sort of like an handle), these are the battery holders i used https://.aliexpress.com/item/1005006283625827.ht , and a hole for the microsd slot, the bms is attached with double sided tape and i used a drill to add the hole for the button (i decided for it after printing it and didnt want to redo everything)
to hold the board i used 2 very small screws for plastic, regarding the on/off switch you can use the one from the original case, i just had to print it slightly longer as it didnt reach the board's switch too well