TTGO Lora32 T3 3 Button & LiPo Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A version of the original with three buttons on 12.7mm centres, space for a 40 x 60mm LiPo and a 9.6mm piezo sounder.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 44
- Makes
- 0
- Views
- 466
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for the TTGO Lora32 which makes it a more useful portable device, with the intention of using it as a pager. It has three buttons on 12.7mm centres (can be done on perfboard), space for up to a 40 x 60mm LiPo and a 9.6mm piezo sounder. Mouser Part Number for the sounder is 490-CMI-9650C-030.
Hole left in the front of the case was originally for a switch extension, but that doesn't work properly so it's been left open for a tool to reach in and operate the power switch. May be revised later. Buttons and sounder may require some glue or spacers to hold them in place.