TTGO Lora32 T3 3 Button & LiPo Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A version of the original with three buttons on 12.7mm centres, space for a 40 x 60mm LiPo and a 9.6mm piezo sounder.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 466
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for the TTGO Lora32 which makes it a more useful portable device, with the intention of using it as a pager. It has three buttons on 12.7mm centres (can be done on perfboard), space for up to a 40 x 60mm LiPo and a 9.6mm piezo sounder. Mouser Part Number for the sounder is 490-CMI-9650C-030.
Hole left in the front of the case was originally for a switch extension, but that doesn't work properly so it's been left open for a tool to reach in and operate the power switch. May be revised later. Buttons and sounder may require some glue or spacers to hold them in place.