TTGO T4 Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the TTGO T4 v1.3 ESP32 development board.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 40
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A case for the TTGO T4 v1.3 ESP32 development board.
Only two of three buttons are available as the remaining one is also connected to an internal sensor and therefore not fully usable as user button. Furthermore, boot and reset switches are not made accessible from outside as these are only needed during development and not during operation.
Necessary for assembly:
- 4x M2x12mm
Note that it is not necessary to drill threads into the bottom part if printed with the correct tolerance.
See also https://github.com/daniel-starke/TtgoT4Clock
Print Settings
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 15%
Filament: Maertz Budget PLA+ Black
Notes:
Print both parts in the given orientation. No supports needed.
It may be necessary to change the tolerance in the included FreeCAD file depending on the used printer.