TTGO v2 LORA with buttons and 1.3" OLED Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Only a few enclosures for the T-Beam TTGO LORA boards out there, and I didn't find any that were designed for the…
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 479
- Makes
- 3
- Views
- 2,893
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Only a few enclosures for the T-Beam TTGO LORA boards out there, and I didn't find any that were designed for the larger 1.3" OLED display. Here's my version. This one allows for button and USB access. Lid snaps into place and is held securely with the antenna.
Updated
Included a regular case with 0.96" OLED display.
Also...
Attached a "slim" case with a 0.96" OLED display. My battery port got accidentally fried due to inverted battery placement. When powered via USB, the unit still operates. I trimmed off the battery harness, and it seems to work quite well.
*UPDATED AGAIN*
Feedback from user suggested I widen the buttons holes slightly, and position a block for the PCB preventing the buttons from accidental triggering. On the lid an indent for the stock antenna since the previous design was a little too thick. Updates in V3 model. Let me know if I've missed something.
Print Settings
Printer:
FLSUN i3 2017 Customized
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
No
Filament:
Stronghero3D PETG
Blue & Green
Category: Electronics