Case for TTGO T-Beam V1.1 (RDZsonde) with 2.0 TFT Display
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a upgraded Case for the TTGO T-Team RDZSone tracker board with 2.0 TFT Display.
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 595
- Wydruki
- 3
- Wyświetlenia
- 4497
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a upgraded Case for the TTGO T-Team RDZSone tracker board with a 2.0 TFT Display.
Print instructions
Parts
- 1x LILYGO® TTGO T-Beam V1.1 ESP32 433 Mhz WiFi Bluetooth GPS
- 1x 2.0" ILI9225 SPI TFT/LCD
- 4x M2.5x10mm Flat Head Hex Screws
Assembly
- Print parts
- Remove support from lid
- Connect display and board with cables
- VCC to 3.3V
- GND to GND
- SDA to 4
- CLK to 13
- RST to 14
- RS to 2
- CS to 0
- Close lid with the the flat head hex screws
- Flash Firmware. You can find detailled installation instructures for binary images at http://rdzsonde.mooo.com
Links
Some of the links to AliExpress are advertising links. I would be happy if you use this link, but of course you don't have to. I have linked exactly the offers from which I have also bought and was satisfied with the supplier and the goods. The products can of course be bought anywhere.
Credits
This is a remix of TTGO case for 2 inch TFT and SoftRF case v5 (for TTGO T-Beam). I fixed some problems with the buttons and optimized the lid.