1 / 2
Ender 3 V3 KE/SE Y-AXIS Tensioner Redesign (For Tighter Belt) — zdjęcie 1
1 / 2

Ender 3 V3 KE/SE Y-AXIS Tensioner Redesign (For Tighter Belt)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Redesigned Tensioner which uses the original bearings, designed to give more tension in the Y-Axis Belt.

Ocena
5 / 5
Polubienia
83
Pobrania
426
Wydruki
3
Wyświetlenia
2512
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

After encountering Y-Axis Slip due to the acceleration values I'm using, I noticed that the original tensioner doesn't allow much tension of the Y-Axis belt, I redesigned it such that it provides a little more tension adjustability. This part uses the bearings from the original tensioner. You can use the original adjuster screws (M4), but instead of the heat-set insert that is used in the original tensioner, this redesign makes use of a press-fit M4 nut.

As for the bearing fastener, you can use the original screw (Although I found an M4X20 is a better fit) and an M4 heatset insert.

Recommended Settings:

Material: ABS/PETG
60% Infill Gyroid
0.12mm Layers
Well Calibrated Printer

Parts Required:
- 2 X M4X20 Screws
- Original Bearings

- 1 X M4 Nut

- 1 X M4 Heatset Insert

Tagi