1 / 2
Ender 3 V3 KE/SE Y-AXIS Tensioner Redesign (For Tighter Belt) — image 1
1 / 2

Ender 3 V3 KE/SE Y-AXIS Tensioner Redesign (For Tighter Belt)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Redesigned Tensioner which uses the original bearings, designed to give more tension in the Y-Axis Belt.

Rating
5 / 5
Likes
83
Downloads
428
Makes
3
Views
2,519
Reviews
4

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

After encountering Y-Axis Slip due to the acceleration values I'm using, I noticed that the original tensioner doesn't allow much tension of the Y-Axis belt, I redesigned it such that it provides a little more tension adjustability. This part uses the bearings from the original tensioner. You can use the original adjuster screws (M4), but instead of the heat-set insert that is used in the original tensioner, this redesign makes use of a press-fit M4 nut.

As for the bearing fastener, you can use the original screw (Although I found an M4X20 is a better fit) and an M4 heatset insert.

Recommended Settings:

Material: ABS/PETG
60% Infill Gyroid
0.12mm Layers
Well Calibrated Printer

Parts Required:
- 2 X M4X20 Screws
- Original Bearings

- 1 X M4 Nut

- 1 X M4 Heatset Insert

Tags