1 / 2
"HONDA" Letters for Motocompacto
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D and SVG files for Honda letters to fill the logo on a Motocompacto
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 179
- Wydruki
- 1
- Wyświetlenia
- 578
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (14)Powiązane
The files are as follows:
- 2mm extruded “HONDA” text suitable for 3D printing if you want embossed text on the sides of the Motocompacto
- SVG file of “HONDA” text if you have a vinyl cutter. Ensure the “H” is 17.8mm tall and the rest of the logo should scale properly.
- A model/svg set of letters that are OFFSET by 0.1mm to fit into the recessed cutouts better than the line-to-line models. Ensure the “H” is 17.6mm tall and the rest of the logo should scale properly.
- A zipped GIMP .xcf file containing the paths used to generate the SVGs and 3D models in case you need more offset!
Note that this is a tight fit, so if you have elephant's foot, the text won't fit. I recommend 3D printing upside-down on the build plate so the visible surface is actually facing down while printing.
I held my 3D printed letters onto the scooter with some Scotch double-stick tape. YMMV depending on how you plan to adhere; adhesives are a science on their own.