1 / 2
"HONDA" Letters for Motocompacto
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D and SVG files for Honda letters to fill the logo on a Motocompacto
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 180
- Makes
- 1
- Views
- 581
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The files are as follows:
- 2mm extruded “HONDA” text suitable for 3D printing if you want embossed text on the sides of the Motocompacto
- SVG file of “HONDA” text if you have a vinyl cutter. Ensure the “H” is 17.8mm tall and the rest of the logo should scale properly.
- A model/svg set of letters that are OFFSET by 0.1mm to fit into the recessed cutouts better than the line-to-line models. Ensure the “H” is 17.6mm tall and the rest of the logo should scale properly.
- A zipped GIMP .xcf file containing the paths used to generate the SVGs and 3D models in case you need more offset!
Note that this is a tight fit, so if you have elephant's foot, the text won't fit. I recommend 3D printing upside-down on the build plate so the visible surface is actually facing down while printing.
I held my 3D printed letters onto the scooter with some Scotch double-stick tape. YMMV depending on how you plan to adhere; adhesives are a science on their own.