EnXLosure 2-Part Top Panel with Magnetic 4 Inch Exhaust
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic, top-mounted, 4-inch connection fits your Prusa XL's EnXLosure, combining designs from PeterM and JCShumpert
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 265
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm glad to have incorporated PeterM's EnXLosure 2-Part Top Panel (Top R2) when assembling my EnXLosure a few months ago. The 2-Part Top has made installing a top-mounted vent very easy with its interchangeable center panel. I also really liked JCShumpert's Magnetic Fume Exhaust (4 inch duct) for EnXLosure Backpanel, but wanted to vent from the top of my enclosure due to the space available. I've combined the two ideas and am happy to share the result here.
Materials You'll Need
You will need somewhere around 32 (thirty two!) 6x3mm (6mm diameter, 3mm high) round neodymium magnets to fill all of the magnet holes. Use N52 grade magnets for a really strong connection.
Print in PETG, ASA, ABS, PC, something strong and able to withstand some heat. Consider also using TPU and PETG together - see below.
Printing - Single or Multi Material
Given the capabilities of the Prusa XL Multi Tool, I decided to do a multi-material print with PETG on the inside surfaces of the slip ring connections to give the structure rigidity, and TPU on the surfaces where the slip ring meets the hose adapter, the bottom of the slip ring where it meets the top panel, and the outside surfaces of the hose adapter itself. For me, this provides a more snug yet still rotate-able slip ring connection to the top of my EnXLosure than the all-PETG print I made of the same components does. Check out Slipring Prusa XL Multimaterial.3mf and Hose Adapter Prusa XL Multimaterial.3mf for examples of how I used the multi material painting tool to paint TPU onto those surfaces.
If you'd rather use only one material for the slip ring assembly, you can delete the multimaterial painting from my .3mf files or use the hose adapter and slip ring .stl files found in the the original Magnetic Fume Exhaust (4 inch duct) for EnXLosure Backpanel's files area.
Assembly Notes
I realized when assembling mine that the magnet holes were not quite deep enough after filling the top panel with 16 magnets, two stacked on top of each other. For the slip ring, I used 8 magnets, press-fit into but not all the way to bottom of those magnet holes. The connection seems plenty strong to me and now I have 8 magnets to spare.
Prusa XL + Voron + Magnetic Exhaust = Bench Buddies
If you also have a Voron 2.4 or Trident 3D printer, consider building our Magnetic 4-Inch Fume Exhaust Vent for Voron 2.4 and Trident which will enable you to switch between having your Xl or Voron attached to the ventilation system easily.