91 modeli
Full, polycarbonate enclosure for Prusa XL with many features such as; Strong, 3mm thick Polycarbonate panels Rigid-mounted doors on the bottom section Full, 270-degree opening front for excellent access and view of the print Magnetically…
This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure. You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that…
August 2025: Updated with new layout I've used this kind of tool caddy forever, with versions for LACK enclosures and Prusa Core One . It has enough space for all the tools that come with the XL, and then some: The version for the…
Articulated Camera Holder for the Prusa Buddy3D Camera The Camera fits perfectly even with the enclosure attached to the XL. I have modified the arm, so that the door can be opened without collision. Based on the articulated GoPro Cam…
These changes clean up the front a little bit so everything fits together better and you have a little adjustability with the front doors. I printed these in Priline Super Hard Polycarbonate Carbon Fiber with a scale factor of 0.35%. You…
I wanted a camera inside my prusa enXLosure to connect to prusalink/ -connect. For this upgrade you will need; - ESP32-CAM module - 1x M3 Heatset insert - 1x M3x8 bolt - Micro-USB cable (best to get right-angle) - USB powerbrick - You…
Short extrusion covers to fit in the bottom slots after enXLosure install
The panel portion of the lid has been seperated out into a new body, in the style of the original, with an option for a no-support version (so either mounting the acrylic panel from the inside or outside). Also a version with a printable…
Overview My assembled EnXLosure lid skewed outwards more than the magnets could pull inwards. I designed this simple part to hold the lid at the correct width. The lid can still be lifted straight off to be removed. Print Settings I used…
Suitable for everyone: You are about to print/build your enXLosure and want to include a HEPA filter. You might incorporate a HEPA filter in the future and want to be prepared. You want to retrofit your enXLosure with a HEPA filter. There…
I made an ESP32 camera mount and case for my MK4 and XL. I built an EnXLosure that makes mounting more difficult for the XL. I decided to do a magnetic mount that will clear the tool head when homing or printing, as well as fit inside the…
Tool Rack by Matt Boyer to fit the EnXLosure by Voxel3D_Nederland
Back Story I wanted to utilize a HEPA filter for my newly enclosed Prusa XL5TH (thank you again @Voxel3D) for Carbon Fiber reinforced PolyCarbonate. I looked into using that cool ALVEO3D filter (the AlveoONE), but it didn't look possible…
Can be used with most of the rectangular temperature & humidity sensors you can find on Amazon or AliExpress. The Prusa Temperature Sensor also fits well. Hole dimensions : Front : 48.20 mm x 29.20 mm Rear : 45.80 mm x 26.80 mm BOM : 2 x…
Replacement Door Top Stop for Prusa Humidity / Temp display and Modeled In Solid Trim
To mount an ESP32 Camera to the inside of the Prusa EnXLosure . This is a remix of Voxel3D's great original design, which didn't work for me as my ESP32-CAM module uses a USB-C cable and none of my cables fit through the cutout of the…
A remixed top panel for the EnXLosure, using a separate sheet for the top panel, and splitting the four sides into separate parts to be less susceptible to warping issues. Requires the following additional hardware: 14x M3 inserts 14x…
Overview This is a simple mount for a Logitech C920 (sometimes called a “C920 HD PRO” or other names) to hold it on the upper corner of a Prusa XL. The mount is surprisingly stable with just two magnets, and it fits in the inside corner…
I wanted to add a fan to push the air out from my EnXLosure case. However, I didn't have room for the fan to be mounted behind the case. This design has a cleaner overall look which complements the EnXLosure. I rummaged through my extra…
different magnet position so you can open the lid or the doors without first opening either
Did you also break your hinges? Do you compulsively need every part to be as strong as possible? Then these remixed hinges will be perfect for you! Also note that having your printer on the floor can lead to problems like these. My XL is…
A redesign of the Prusa XL screen guard , but compatible with the EnXLosure (A very nice minimalistic enclosure) . It is slightly less wide, and fits together with a set of doorstops compatible with the enXLosure. You can re-use the…
The removable doors for the EnXLosure by @JFet are an excellent idea. But, by sticking with the standard hinges, the doors only open to about 155°. These improved hinges have a minor change that avoids the binding on the front beam…
This is an obsolete version. Please check out https://www.printables.com/model/1116399 for an updated version with much improved stability. Love my Wyze cam to monitor prints. Love my enXLosure . But the two don't really cooperate well.…
Added 5 degrees, to make it fit tight against the frame and tapered the ends so it will self align as it closes
I rely on Alveo3Ds filter boxes for all my printers to safeguard against hazardous fumes and UFP. I highly recommend using an enclosure and a filter box, especially if your printers are situated at home, like mine, in a room or a similar…
Make your already-XLent EnXLosure for your Prusa XL even more XLent! Add fume extraction and ventilation with this remixed Back Top Panel by moi, Upton O'Goode, featuring a port that fits standard 4 inch flexible “dryer” duct. Some…
I don't always need the EnXLosure closed when printing, and the doors got in the way. Remixed the front beams to allow doors to be easily removed/replaced. Where to put the removed doors? New mounts that attach to the sides of the…
ESP32-CAM Mount for Prusa XL EnXLosure with ventilation openings
PLA Supports for PETG on tall parts.
Remixed the original by Prusa to fit on the side of the EnXLosure by Voxel3D
EnXLosure Top Rail Solid mount with Calibration Pin Holder to provide more rigid mounting of enclosure top. Not sure if this is an issue with the magnets with the Ali kit or if it was just due to the strength of the magnets that I was…
Hello 3D-Friends :) i was looking for a camera solution for my Prusa XL. I actually wanted to use Octoprint for this, but unfortunately I discovered that there is no progress indicator on the Prusa XL's display. A big no-go for me at the…
I wanted to reprint the corexy-parts of the Prusa XL in Prusament PC Blend Carbon Fiber and I noticed the big air gap when using the EnXLosure from VOXEL3D. So I simply remixed the original. The inward edge has been made sharper (chamfer…
This is an improved version of my previous mount , with increased stability. With the previous version, high speed jerky extruder movements could end up with too much vibration. This version is much sturdier. Love my Wyze cam to monitor…
just re-use old hardware and you should be all set. I printed this parts in PLA plus the adjusted scale.
I remixed the Tool bin to fit the Enxclosure
Modified Fillet Radiuses for Easier Printing. Modeled in multi-color trim with draft vs painted on in slicer.
I built This enclosure for my XL using this model https://www.printables.com/model/610843-enxlosure-minimalist-and-printable-prusa-xl-enclos From Voxel 3D. I wanted a better system for managing opening and closing the access door. As a…
Back Story Holy crap Batman, it was getting loud by my desk, this was due to 3 EIBOS3D Cyclopes filament dryers, the Prusa MK4 with Prusa Enclosure with HEPA filter, and my Prusa XL 5 tool head with EnXlosure and my own mod of the same…
Single one piece, instead of 3 individual hinges. For EnXlosure Top Door with 1/4"(6.35mm) window that also pivots further open. Original was designed for 3mm thick window.
This is an add-on for Voxel3D_Nederland's enXLosure, to address an issue I found with it during the build. The enXLosure can be found here: https://www.printables.com/model/610843-enxlosure-minimalist-and-printable-prusa-xl-enclos WHY…
Happy user of the EnXLosure for my XL. However, my basement workshop has a fairly low ceiling where the XL sits, so the top lid of the enclosure hits the ceiling and won't stay up. This is a simple solution to keep the lid in place at a…
The slanted top door of the EnXLosure (a very nice minimalist enclosure) provides an excellent view of the print bed and easy access. I find myself using it far more often than the lower two doors. However, I wanted to address two…
EnXLosure bottom_bl and bottom_br stiffened parts to minimize flex while printing
Fix ESP32-CAM's terrible Wi-Fi by adding a proper antenna to it. RSSI was between -95 and -85dBm with the PCB antenna and are now around -69 with the ½-wave dipole salvaged from an old Wi-Fi router. You'll need: 1x u.FL/IPX - SMA pigtail…
To use with an Active Heater to blow warm air from above into the chamber. The “cold” air needs to be sucked from down the chamber up with a pipe. For the added weight, i added dupport beams. There is a second file that has support…
Background I have been using an AC Infinity Cloudline Pro S4 fume extractor with my Voron 2.4 for a while and when I finally received my Prusa XL and built my EnXLosure for it I wanted a quick way to swap my duct hose between the…
A redesign of the Prusa XL screen guard , but compatible with the EnXLosure (A very nice minimalistic enclosure) . It is slightly less wide, and fits together with a set of doorstops compatible with the enXLosure and adds a light…
This Remix adds holdes for a AlveoONE filter, a mounting relief for a Satel DRP-100 Smoke Detector and mounts for a BlazeCut. The smoke detector needs a powersupply of 24V and a circuit that triggers at currents >10 - 20mA. It shall cut…
I'm glad to have incorporated PeterM 's EnXLosure 2-Part Top Panel (Top R2) when assembling my EnXLosure a few months ago. The 2-Part Top has made installing a top-mounted vent very easy with its interchangeable center panel. I also…
This model allows you to use the Buddy3D camera with the Prusa XL. It even works with the EnXlosure (but that is tight). This is a multi-remix of multiple models: The 3DBuddy redux model The Heatbed accessory mount The new version 2 has…
Top panel insert without logo. Printed 3 perimeters, 4 top and 4 bottom layers. It printed well with 0.25 layer height on 0.4mm nozzle.
Want to add more light to your Prusa XL's EnXLosure ? This LED Light Bar Mount augments PeterM 's EnXLosure 2-Part Top Panel (Top R2) and Voxel3D_Nederland 's excellent EnXLosure Prusa XL Enclosure system, providing a mount to hold an LED…
Modified upper door handle so the lower doors don't scrape on it while opening. I removed about 1mm from the lip of the handle. Other than that it is identical.
This is a camera mount for the Buddy3D camera. It mounts using two of the screws on the side of the EnXLosure. I printed it in PETG just to match the rest of my printer, but since it mounts to the outside I'm sure PLA would work fine.
Care was taken in the design to ensure that no melt-in thread inserts are required on the entire housing. Instead, the construction was designed with square nuts measuring M3 x 5.4 mm x 2.4 mm (M3 x 0.21 In x 0.0.9 In). This means that…
This bumper works with The Prusa XL + the EnXlosure - or without it. It … .. is much easier to install as the three old pieces are combined into one. .. encapsulates the display so that less dirt can fall into it from the printer ..…
My print of EnXLosure_Bottom_BR and EnXLosure_Bottom_BL from plate 2 of the EnXLosure failed at 97%. The parts were incomplete and not damaged. These are quite large parts, so to avoid wasting them, I designed this joiner part so the…
I did not like that the door did not open more and that the top was suspended and not lying flat on top of the printer. So i modified the hinges. The top ones require 3 19mm m3 screws and 3 m3 nuts. 10/11/25 edit: Added a toe to one of…
This is a model created to measure dimensional accuracy/shrinkage for x-y axys as described below: IMPORTANT NOTE: PETG, ASA, ABS and other materials slightly shrink after printing. This shrinkage can be up to 0.50%. This might look…
A while back I modified the enclosure, I have for my XL to have 80mm fans attached so I can keep the doors closed and not get too hot. I decided to add a filter box which I filled with activated carbon to get rid of any VOC some materials…
I liked the original except for the cable sticking out to the side. Routing it towards the back made more sense.
Made an EnXLosure mount for a Unifi G3 Instant cam. There's a cable channel to tuck the cable behind the mount. Remove stock G3 Instant swivel mount, retain stock mount bolt and reuse. Options for attaching to enclosure: Insert an M3…
Prusa enXLosure filter system https://www.printables.com/model/951857-firmware-compatible-air-filtration-system-for-enxl
Clip Cable USB CAM for EnXLosure You need to insert M3 Thread into the hole you want fix clip and M3x6
I recently bought a Prusa XL and outfitted it with the EnXLosure by Voxel3D_Nederland. It's a great printer with a nice enclosure, but it was still smelly (I print a lot of ABS). I needed filtration. None of the available options seemed…
After using my first exhaust filter for half a year now I noticed that I had still to cough quite often when entering the room. Turns out that a HEPA filter is really something which should be used in addition to the activated Carbon. I…
I made a remix from @holck to be able to fit it the way I wanted in the enXLosure.
This project adds a filter with fan and various optional accessories to the top panel of the enXLosure by @Voxel3D. You will need the frame pieces as designed by @philon in…
I found myself never using the front doors, and they never fit together particularly well, needing a lot of coaxing. I can still access the build plate in full, and still get adequate PLA ventilation with the lid open. Easily removable if…
The esp32 cam addon for the enXLosure (https://www.printables.com/model/633675-esp32_cam-mount-for-prusa-enxlosure) is a nice feature but there is no obvious way to hold the USB cable in place. This adds small little holders to hold the…
Remixed the EnXLosure_Top to fit a remixed Holder for the stripped-down Buddy3D.
I wanted to lesson the gap between the front doors of the EnXLosure and the CoreXY front upper brackets. I found a remix from INVESTEGATE which contained this change but had hexagonal patterns. I didn't like this pattern so I removed them…
I have made a camera mount for the EnXLosure. You can attach it between 2 screw points on the plexiglass. It is printed in PETG and I have not tested other materials. The original ball of the Tapo C100 camera is used and clipped into my…
===== Update 4 - 26.08.2026 ===== Here’s the fourth and final update on my Prusa XL heated chamber EnXLosure mod. Current Status Version 3 of the model is now available and the project is officially completed . After several successful…
This is a lid for the EnXlosure, which allows to a. add this exhaust filter/fan https://www.printables.com/model/779722-exhaust-filter-with-fan-enclosure-for-3d-printers b. is flexible to easily swap the exhaust with something else if…
I printed this using my XL and used PLA as support for the PETG. It separated beautifully and made the print a breeze. After printing, use some tpu filament as a gasket. I put some CA glue in the corners and pressed the TPU into place…
The Prusa XL EnXLosure Aqara TVOC Sensor Mount is a holder for the Aqara TVOC Sensor. It is mounted to the inside lid of the EnXLosure using the same mounting method as the original magnetic catch. This provides a convenient display of…
The Prusa XL enclosure we mounted on our printer hat some issues with staying on the printer frame. So I modified this mount to enable proper mounting using nuts and also improved the printing orientation by adding a flat face. Adds a…
This is a remix of urbanvanilla design that lets you mount the Yi 1080p camera to the Prusa XL extrusions while having the Enxlosure, I modded 3D_Pfuscher bracket to fit with the “Lego” tower build, You need to print all the parts and…
This is a remix of urbanvanilla design that lets you mount the Yi dome gourd camera to the Prusa XL extrusions while having the Enxlosure, I modded Kimosabi Yi dome bracket (Not professional as you can see but it does its job well) and…
My XL has a few mods on it like the CPAP cooling toolchanger, and a custom-made filtration system, so space inside of the enXlosure for a camera is pretty sparse. I decided to throw this janky thing together and press it up against the…
This is a simple holder for Buddy3d camera on an EnXLosure. It gives a lovely view angle that just covers the whole build plate. The camera is mounted outside the EnXLosure, so it's protected from heat, but you'll probably need to wipe…
Adjustable mount for use with the EnXLosure.
I disliked using nylock nuts and washers on parts, this uses the more standard heat-sert method to back the bolts.
I rely on Alveo3Ds filter boxes for all my printers to safeguard against hazardous fumes and UFP. I highly recommend using an enclosure and a filter box, especially if your printers are situated at home, like mine, in a room or a similar…
Make your already-XLent EnXLosure for your Prusa XL even more XLent! Add fume extraction and ventilation with this remixed Back Top Panel by moi, Upton O'Goode, featuring a port that fits standard 4 inch flexible “dryer” duct. Some…
This listing contains all design files in step and Fusion360 format. They can be used for easy remixing/modifications. All stl models are still available for free via the original, free listing found here Things you need; Prints ; -…
I wanted to incorporate the original Prusa enclosure electronics into my $129 enclosure design. This way, you will have the best of both worlds! The first step is integrating the original alveo3d filtration system into the enXLosure. It…
![Prusa XL + Buddy3D [+ (optional) EnXlosure] = Finally a proper camera! V2.1](https://media.printables.com/media/prints/cc1ff817-1bc4-422b-8db8-b8621fb7fbab/images/9932174_79ba0de8-bcc7-42f4-9842-4478fb3b0da4_d38beba8-87ac-48ba-bcf0-e3dc7d675355/screenshot-2025-06-02-at-163442.png)
