1 / 1
Tool Caddy for Prusa XL and XL/EnXLosure — zdjęcie 1

Tool Caddy for Prusa XL and XL/EnXLosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Handy storage solution for the stuff you need, mounted in the 3030 extrusion.

Ocena
4,667 / 5
Polubienia
59
Pobrania
270
Wydruki
9
Wyświetlenia
1763
Oceny
9

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

August 2025: Updated with new layout

I've used this kind of tool caddy forever, with versions for LACK enclosures and Prusa Core One. 

It has enough space for all the tools that come with the XL, and then some:

 

The version for the EnXLosure is basically just the internals mirrored, to give access to the wrench slots.

Print instructions

See 3mf file for suggested orientation and print settings. I would suggest using PETG or ASA as the enclosure gets warm on the outside. I accidentally printed a copy with zero infill, and it still came out fine. The liner goes into the larger compartment, which has a built-in support, remove before use.

Mirror along the x-axis for the caddy to go on the left side of the printer. 

Fusion 360 files included.

If you like what I'm doing…

 … consider buying me a coffee or joining my Club.

Tagi