1 / 2
Prusa XL Screen Guard for EnXLosure with light — zdjęcie 1
1 / 2

Prusa XL Screen Guard for EnXLosure with light

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A remix of "Prusa XL Screen Guard for EnXLosure" which adds a better visible light

Ocena
0 / 5
Polubienia
12
Pobrania
36
Wydruki
0
Wyświetlenia
338
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

A redesign of the Prusa XL screen guard, but compatible with the EnXLosure (A very nice minimalistic enclosure). It is slightly less wide, and fits together with a set of doorstops compatible with the enXLosure and adds a light transmitting area so that the display shine can be better seen.

You can re-use the magnets of the original Prusa enXLosure doorstops (2x 6x3mm round neodymium magnet, 3mm high) and re-use the screws and inserts of the original Prusa XL Screen Guard (2x M6 screws 30 mm, 2x M6 profile inserts)

For optimal strength print vertically, use an aditional perimeter and 25% or higher infill.

Tagi