Prusa XL - ESP32 magnetic camera mount for EnXLosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic mount to fit ESP32 camera inside the EnXLosure.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 128
- Wydruki
- 3
- Wyświetlenia
- 1002
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I made an ESP32 camera mount and case for my MK4 and XL. I built an EnXLosure that makes mounting more difficult for the XL. I decided to do a magnetic mount that will clear the tool head when homing or printing, as well as fit inside the EnXLosure. There is a right and left side version depending on where you want to mount it. I used the left sides since that is closest to my power outlet.
I ran the cable along the rail and filed a small groove in the EnXLosure top to allow the cable to fit through the back. You can print however many articulated arm pieces you want for your needs, but I printed my magnetic base, the camera case, and one “Gopro_Like_Joint_Straight_Middle.stl” from the articulated arm files.
You do want to make certain the camera will not collide with the tool head, I aligned the base with the front of the EnXLosure top, and the field of view is adequate for my needs.
You'll need 2, 20mm x 4mm Neodymium Disc Magnets like used for the EnXLosure lid. I'd recommend super gluing them in the base.