1 / 8
Prusa XL - ESP32 magnetic camera mount for EnXLosure — image 1
1 / 8

Prusa XL - ESP32 magnetic camera mount for EnXLosure

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Magnetic mount to fit ESP32 camera inside the EnXLosure.

Rating
5 / 5
Likes
15
Downloads
128
Makes
3
Views
1,002
Reviews
3

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

I made an ESP32 camera mount and case for my MK4 and XL. I built an EnXLosure that makes mounting more difficult for the XL. I decided to do a magnetic mount that will clear the tool head when homing or printing, as well as fit inside the EnXLosure. There is a right and left side version depending on where you want to mount it. I used the left sides since that is closest to my power outlet.

I ran the cable along the rail and filed a small groove in the EnXLosure top to allow the cable to fit through the back. You can print however many articulated arm pieces you want for your needs, but I printed my magnetic base, the camera case, and one “Gopro_Like_Joint_Straight_Middle.stl” from the articulated arm files.

You do want to make certain the camera will not collide with the tool head, I aligned the base with the front of the EnXLosure top, and the field of view is adequate for my needs.

You'll need 2, 20mm x 4mm Neodymium Disc Magnets like used for the EnXLosure lid. I'd recommend super gluing them in the base.

Tags