Temperature Humidity Sensor Mount Top Door Stop for Prusa XL EnXLosure
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix adds a mounting plate for a temperature humidity sensor to the EnXLosure_Top_Door_Stop.stl
- Ocena
- 4,882 / 5
- Polubienia
- 52
- Pobrania
- 284
- Wydruki
- 20
- Wyświetlenia
- 1251
- Oceny
- 17
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix adds a mounting plate for a temperature humidity sensor to EnXLosure_Top_Door_Stop.stl , the Top Door Stop on the EnXLosure.
You can use the Prusa Temperature Sensor https://www.prusa3d.com/product/temperature-sensor/ that comes with the Original Prusa Enclosure.
The hole measures 45.8 mm by 26.6 mm and fits many “mini thermometer hygrometer” sensors found on sites like Amazon, like this one https://amzn.to/3S8vsNX *
Prints well with the following settings, no scaling required due to small size.
Prusa XL input shaper 0.6 mm nozzle
PETG
15% infill
0.32 mm STRUCTURAL
No supports, brim or skirt needed
You can harvest the heat set inserts, magnets and screws from the basic Top Door Stop. (Remember to insert the magnets with the correct polarity.)
*Monetizable link