Prusa XL modified CoreXY-front-left & CoreXY-front-right with hexagonal pattern for EnXLosure Remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix that has a hexagonal pattern while minimizing the door gap of the EnXLosure. It can also used without Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 598
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to reprint the corexy-parts of the Prusa XL in Prusament PC Blend Carbon Fiber and I noticed the big air gap when using the EnXLosure from VOXEL3D. So I simply remixed the original. The inward edge has been made sharper (chamfer removed) to minimize the door gap and because I was already there, I added a matching hexagonal pattern.
Print Settings:
0.2 layer high with 0.4 nozzle and 5 perimeters.
or 0.25 with 0.6 nozzle and 4 perimeters.
Infill 25% Gyroid.
I didn't needed a raft for Prusament PCCF on satin sheet. But maybe you… ;)
No supports!
This might also interest you: https://www.printables.com/de/model/683762-prusa-xl-modified-corexy-back-parts
