Prusa XL modified CoreXY-front-left & CoreXY-front-right with hexagonal pattern for EnXLosure Remix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A remix that has a hexagonal pattern while minimizing the door gap of the EnXLosure. It can also used without Enclosure.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 58
- Makes
- 1
- Views
- 595
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to reprint the corexy-parts of the Prusa XL in Prusament PC Blend Carbon Fiber and I noticed the big air gap when using the EnXLosure from VOXEL3D. So I simply remixed the original. The inward edge has been made sharper (chamfer removed) to minimize the door gap and because I was already there, I added a matching hexagonal pattern.
Print Settings:
0.2 layer high with 0.4 nozzle and 5 perimeters.
or 0.25 with 0.6 nozzle and 4 perimeters.
Infill 25% Gyroid.
I didn't needed a raft for Prusament PCCF on satin sheet. But maybe you… ;)
No supports!
This might also interest you: https://www.printables.com/de/model/683762-prusa-xl-modified-corexy-back-parts
