Counting matching models…
Instruction Simply take the two blocks align to the microfiber and cut to the same rectangle size. Wrap the microfiber around the edge and crimp it down. Updates March 23, 2024 Added an alternative knob for thin cloth or sandpaper.…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for one variant
Fiber-Punk Node is an easy and affordable way to control and monitor 3D printers via WiFi, USB-enabled serial, and SD I/O. Node is very robust and power-efficient as it runs on an MCU (ESP32) while still offering a wide range of…
Print approx. €1.18–€1.44 excl. taxPreliminary estimate for one variant
Update: I sent the piece of junk back to Amazon. Wifi connects really easy but the rest was a nightmare. One printer wont read the fake SD card but will home the printer, the other printer, did read the SD and would start the print, tilt…
Print approx. €1.90–€2.32 excl. taxPreliminary estimate for one variant
SFR fiber decoder support to screw on the side of a piece of furniture
Print approx. €6.99–€8.54 excl. taxPreliminary estimate for one variant
Designed a small bracket to attach to the back of the UCG Fiber 10in Rack mount to help manage wires and bricks a bit better. It is affixed with 2x M3x16 SHCS. I wanted to use four ideally but unfortunately there isn't enough room and I…
Print approx. €2.41–€2.94 excl. taxPreliminary estimate for one variant
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This mount is part of a 19-inch modular rack mount system I designed. You can mix and match the modules with other mounts. Take a look at my models here…
A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber cloud gateway. This model comes in 4 variants: With front cutout for power cable routing With holes for M3 thread inserts. → UCG-Fiber 10i RM for Thread Inserts.stl With holes for…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
A modular, 2-part, 19-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the…
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
This is a cooler that mounts on top of the UCG-Fiber to cool the SFP+ port. Specifically made for the WAS-110 module. This design uses a Sunon 5015 blower fan ran at a low voltage (5v) from a USB-C trigger module. More info coming soon!
Align Jig Fiber Laser Fixture Set
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
This design allow to create and keep a loop for the fiber and avoid damaging or breaking it just put double-sided to fix it in the network cabinet. Supports are required for hooks.
My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…
Larger spacing in the bottom so the device can be mounted screen top / ports bottom. Printed in PETG, holds the device really well.
Designed for use with the UCG-Fiber Rack Mount by @Mauker. This panel provides keystone jacks for the 1 x 10 Gb RJ45 WAN port (isolated on one side by the power supply bracket) and 4 keystone jacks for the 4 x 2.5 Gb RJ45 LAN ports on the…
Fiber optic spool holder with racetrack to manage extra fiber. I used this to extend my ISP's fiber and couple it into extra fiber in my house. Has a spot for a panel mount coupler as well. Print it on the bottom face and let the back…
NOTE: The UCG-Fiber is a tight fit inside a 10 inch rack. Before printing, please make sure there's at least 216mm space between your rack rails, otherwise this bracket won't fit. I tried designing this so it doesn't use up too much…
A 10-inch rack mount for the Ubiquiti Unifi UCG-Fiber Power Supply Unit (PSU). This model comes in 4 variations: A plain mount, just for the PSU. A version with keystone slots. A version with a shelf. A version with the keystone slots and…
EDIT Jun 2025: Updated models 9 Jun 2025. Improved the power cable cutout and increased the rigidity of the models in the mid section where they join and across the PSU holder. EDIT 2: Nov 2025. I am not able to do more mods on this. A…
A MasterSpool for the BambuLab AMS. Use it for Fiberlogy 850g Refill print material
Fiber component tray. Holds up to 2 wider (~5mm diameter) components with two spools to store fibers attached to the said component. One can spool them separately or by using 8-figure. Two magnets on the side to store the tray vertically.…
Neatly mount your AC power adapter brick for the UCG Fiber with this 2U printed part. Simply slot the power brick in and mount to the rack. Takes up 2U of mounting space, but keep in mind you'll need additional space underneath for the AC…
The UCG Fiber shares the same footprint but with an elongated length. Model has been widened with more mount holes added as well as a cable routing channel. An f3d file has been included to adjust the mounting position if required.
This is a core adapter for the new Fiberlogy spools. It's designed for the Fiberlogy 850g refills but can be adapted for other refills. Printing recommendations: If you are using a drybox or plan to use these spools in the Bambu Lab AMS,…
A ‘quick and dirty’ remix to add some vents for the UCG-Fiber unit after reading some reports that the unit may get quite hot otherwise. After printing mine, I'd repositioned the vents slightly toward the rear to better align everything.…
Better version of the other one out there that I initially remixed and had a lot of pain with. Organic supports recommended.
UCG-Fiber stand that raises the device a bit for better airflow.
Best printed in PETG. Use 6+ perimeters to add strength to the corners and clips Tolerances are really tight, fit fine for me, but you may need to scale up by a couple of %. I've also made a wallmount for the power brick. If your in the…
Models I have found had too long print time, so I've decided to design my own part, aiming to use as little filament as I could, so printing from leftovers was possible. It takes only ~20g of filament and is designed to be press-fitted…
The reason I made this toolhead was to take advantage of Phaetus's hotend attachment for their APUS extruder, and more importantly I just like how the wheel spinning on the apus looks. Fusion files can be found here:…
Modified FruitieX's model. Removed superfluous hex patterns that make it hard to print and block the SSD port. So now the SSD port accessible, and you can have the fiber face whatever direction you want instead of just one. Also enlarged…
Hi Everyone, Time for my next project to publish. It's called: HiFiBerry Touch. This Boombox is designed in Fusion 360. It contains a 24V 12000 mah rechargeble battery and MoOde audio software. https://moodeaudio.org/ Please press on the…
A remix of Unifi UCG-Fiber 10-inch Rack Mount by @Mauker. It's a version cut down into pieces to print without support
I didn't wanted my Node to stick out in front of my i3 so I designed this holder that mounts to the original Prusa display holder with some M3 screws. The SD card adapter slides in right beneath the node.
I made a wall mount that fits my new UniFi Cloud Gateway Fiber in a 90° rotated orientation (the screen automatically rotates). It fits perfectly on all sides and doesn't block the ventilation or the NVMe SSD storage compartment. Due to…
Remix of Molle Granade Holder by NoX the FoX : What did I remix? I brought the inner walls, in so that the Lil Dude 6 mast will snap into place and in theory, I could operate tacticool ham radio from my bronco, with the tailgate open,…
Retention backplate for the UCG-Fiber PSU rackmount found at CAD on OnShape
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see…
The back plate file included with the original model package doesn't allow for excessively tall SFP modules such as the WAS-110. I've removed the top portion of the back plate to give enough clearance for the WAS-110's large heatsink (and…
Improved the original Fiberpunk Node Case for Prusa MK3S easier to print → no chamfer in the front hole for the status LED hole for flex cable to the SD-Port of the MK3 better LCD fitting Additonal infos about the node:…
This is a Tag, you can stick to your lens cover of your fiberlaser. So you'll never ever forget to remove the cover before you laser-engrave. I was inpired by the “remove before flight”-tags in aerosoace hangars
If you don't want to spend the money for metal ones, these will work just fine to fix your workpieces on your fiber laser bed.
wall mount for UCG Fiber power supply, with recessed screw holes
Ubiquiti Cloud Gateway Fiber OEM Power Supply Wall Mount Keep your Ubiquiti Cloud Gateway Fiber power supply neatly mounted with this custom-designed wall bracket. Designed specifically for the original OEM power adapter included with the…
Rack mount Gateway Fiber/Cloud Gateway Fiber (UXG-Fiber/UCG-Fiber) for 19 inches rack. Due to the device is too wide the mounts are not detachable. It is exactly 9.5 inches wide so it is possible to use with another device in the same…
I repaired STL file that originaly names: fiberlogy-spool-A
Mount the power supply of a UCG Fiber onto openGrid, via openConnect I printed it with support, auto/snug/top Z distance : 0.3mm
Absolutely awesome work from MartinRowan . I wanted to put my fiber optic modem on a sled. Used the provided blank sled .step file and made this sled. I'm including the first iteration I made and the final iteration. Initial: Full sled,…
This is a UCG Fiber mount combining printed components and a common 19" 1RU Brush plate or blank. This mount is more rigid than others, avoiding sagging or flexing. It incorporates a PSU mount, some keystone locations, a side entry and…
This is a snap in insert that can manage cat cables for those who don't like adding unnecessary patch cables and jacks..
I wanted the rack mount ears to come out at a right angle so that I could utilize the horizontal ears in my rack and not take up a valuable U space
I remixed the Skadis Unifi Fiber mount to openGrif via openConnect. I've added four versions, to get four directions, when using the integrated power cable channel. I printed it with support, auto/snug/top Z distance : 0.3mm The 3mf has a…
Skadis version of the UCG Fiber PSU mount
Excuse the color variations in the plastic
A quick remix of the back plate from @mauker cloud gateway rack mount to mount the power supply. My print settings (Core One) PETG PrusaSlicer print profile “0.25mm STRUCTURAL” 15% Infill, Gyroid Required parts 2 Cable ties
These are adapter rings for 3DJakes PLA, PETG, ASA and TPU spools. Before printing, double check the dimensions in the file name with your spool, 3DJake has some variants of similar spools and if you encounter one that I haven't uploaded…
I designed this mounting system to help me position a phone, a small camera, or even a flashlight while working in the workshop. It keeps my hands free to document projects, capture overhead shots, or simply provide better lighting where…
~ Fiberlogy collaboration series ~ We are introducing to you a whole new collection of vases available for free! This is the effect of a great collaboration with Fiberlogy. They invited us to test their new filament series and share the…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
DX Engineering Carbon Fiber Mast Accessories. DX Engineering sells a 33' heavy duty carbon fiber collapsible mast. I use this mast to elevate an End Fed Half Wave antenna for amateur radio usage. I use a tripod and 3 guys lines to…
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
Splice tray with adjustable loop length. For optical fiber joints.
Dual Business Card Engraving Jig – For Fiber Laser Setups Looking to engrave business cards more efficiently? This dual-position jig is the perfect solution for streamlining your workflow and achieving consistent, professional results.…
Fiber optic SC connector insertion aid Insertion aid for SC connectors in empty conduits, holes in walls, or shafts. Since the ONT should not remain in the basement, I created this insertion aid. It is important to me in this project to…
This model was made for a Plasmonics Internship, where I had to secure the optical fiber. It has a special end to it from another equipment, which I do not record (probably a spectrometer). This model was, in part, inspired by the "…
PCIc slot cover for H!Fiber Gigabit 2 Port NIC https://www.amazon.com/dp/B07KG3R2RF
Created from scratch, uses the stock nuts and hardware from a creality-style spool holder. Uses less material than other designs while maintaining strength, also saves as much room as possible for lower tents. Printing instructions:…
Elevate your LoRa gateway or Meshtastic node with this custom-designed pole mount. Specifically engineered for fiberglass omnidirectional antennas (like those used with RakWireless, Helium, or MeshCore kits), this mount provides a secure…
Laser Fiber cutting Nozzles Box Print with organic supports throughout, and support blocks on the hinges. Window made with 1 mm Acrylic, cut with Co2 laser, DXF & SVG files attached. Rotation axe made with fiber glass or carbon fiber or…
I printed this on a Prusa Mini using Inland PLA+. It's designed to be easy to print. Set the base flat and right side up, supports suggested for the base insets for the rubber feet. Set the cover upside down. Generate supports at…
12-Up Dog Tag Engraving Jig — 6.5mm Mounting Rail (Fiber Laser Ready) | STL + 3MF 🚀 Boost your engraving production with this 12-up dog tag laser jig by Song Dawg Designs —built to help you engrave up to 12 dog tags at once with clean,…
Plastic style: To be printed in a non-brittle, non-warping material, PETG and PLA+ are perfect. On a good 3D printer with a good precision ... A millimeter must be a millimeter ! Print your tabs, along with the nut and bolt. Don't rush;…
Remixed version of @RobertCowanDIY Fiber Laser Air Duct. Changes: Added 90° turn to outlet Adapted to attach to a 4in Shortened connection between two pieces Print Settings: Cut into 45° and printed in two pieces as seen in the 3MF…
Сам печатал пластиком ABS 0,4 соплом с разглаживанием на всех верхних поверхностях, чуть подгонял по посадочному месту. Делал под оптоволокно 1.5мм, запаситесь сверлом по металлу на 1.5мм и тогда зайдет на ура. Я доп. посадил на космофен…
Take your production to the next level with this Hat Clip Engraving Jig , designed for precise and repeatable alignment on both fiber and CO₂ laser machines. ✅ This alignment fixture includes a 6.5mm rail to ensure consistent placement…
In PLA. Print 15% infill with support on the build plate and organic supports. .20 balanced or structural. In PC Blend. Print 100% infill with support on the build plate and organic supports. .20 structural. Note: If possible; Consider…
!!!WIP!!! After some field testing, some reinforcement is needed. Keep an eye out for the next version after V3. Recommend 8 perimeters, and at least 5 top and bottom layers to make sure it is strong enough. V3 includes a T20 bit on the…
Remix of Clippy V2.0 to use with cheap telescopic carbon rod (aliexpress, fishing gear) Glue in a M8 threaded rod (with 2-part epoxy) Thanks for the great original model!
A box to store consumables for "Gweike M-series" fiber laser head. Up to 19: PW-D20-3mm lenses 1152101 Spring sealing rings WSXLH-G205-01 Two ceramic rings D20-M10 One Inox gauge L65N Print with organic supports on the plate only, with 4…
I always have leftovers when doing layups on bigger Carbon fiber projects, and I hate to throw them away. I also had the issue of breaking off some tirelevers when trying to mount or remove my tubeless bicycle tires. So I decided to…
Wall-mounted dispenser holder for a box of 20 reusable Microfiber Rags with rag hanger. Microfiber Rags holder dimensions: Mounting recommendation: two countersunk screws, 3.5 mm diameter double-sided adhesive tape Printing…
I wanted to have an easy to print wall mounting device for my FritzBox! 5690 that I can attach to the wall with the connections up. The version from SteveBa (thanks for the later help) seemed to be perfect but unfortunately was for the…
Summary This is a holder for multiple Fiberpotter cardboard pots. The have a bottom diameter of 5cm and a top diameter of 8 cm. It comes in two variants: base and midsection. Printing I don't think it especially matters what filament you…
Mastspitze mit Ösen zu Fiberglas Mast, der oft bei Funkamateuren benutzt wird. Mast tip with eyelets for fiberglass mast, often used by radio amateurs.
SINGLE DOT FIBEROPTIC SIGHT FOR AIRSOFT GLOCKS (G19) Unique design eliminates the need for a front sight, and multiple dots. When the sight is on target the dot glows in ambient light, when off target the dot is obscured by the walls of…
This is a clip (or, when extended, a small cable channel) for fiber-optic cables approximately 3 mm thick — the type of cable typically used for fiber-optic connections running from the junction box in the apartment to the router. The…
This Skadis mount is designed to hold the Telekom fiber optic modem using its integrated wall mount. To attach it to the Skadis board, print two T-Clips from the original Skadis clip design that matches your board type.
Rack mount for Nokia Fiber Modem, which provides easy access to the connectors, while keeping the LEDs visible as well.
Retention backplate for the UCG-Fiber PSU rackmount found at CAD on OnShape
I made an enclosure for my fiber laser and I have changed all of my lenses to the Cloudray F-Theta lenses. I wanted a way to keep the lens cover handy, so I modeled a simple holder for them. I mounted this to the front of the enclosure,…
This slides over top of the rod to be able to run a string/cord through them to establish a barrier. Due to the nature of manufacturing tolerances of the stakes, these are made to fit the average 8mm rod. Some may be slightly loose or…
Elegant decorative vase with a modern curved silhouette and textured carbon fiber style surface. Perfect for shelves, desks, tables, or as a stylish centerpiece. The design combines a wide body with a narrow neck, creating a clean and…
A holder for the BPCMH ( https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder ) to use the double-side tape to hold it to wall. More elegant version without the screw holes. If you would like to support me - you…
This model is a modification for pool filter systems (type 602/220) that replaces standard paper cartridges. It allows using polyester fiber (synthetic padding) or filter balls instead of disposable cartridges. Advantages: - Reusable…
