Fiber component tray
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tray for friction-mounted fiber components (couplers, filters, etc.) with two fiber spools and covers for storing.
- Rating
- 5 / 5
- Likes
- 19
- Downloads
- 224
- Makes
- 1
- Views
- 984
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
Fiber component tray. Holds up to 2 wider (~5mm diameter) components with two spools to store fibers attached to the said component. One can spool them separately or by using 8-figure.
Two magnets on the side to store the tray vertically. Additionally, one magnet per side (top/bottom) for horizontal storage. Magnet diameter 10mm and height 2mm. The top and bottom are press-fit, and the sides are glued in, but they are close to being a press-fit.
Separate covers (with or without a central grid) to secure the fibers. The grid is compatible with fiber connector holders, see pictures.
Default fiber component housing diameter ~5mm. Can be changed as a parameter in the provided CAD files.