Counting matching models…
Halterungen um eine PTZOptics G2 Kamera auf einem Balken oder an einer Traverse zu befestigen. Kameramontage über die drei metrischen Gewinde oder über das 1/4 Zoll Stativgewinde. Infos zur Traversenmontage: - Konstruiert für Traversen…
This bracket holds the Hubble Optics artificial star and mounts it to a standard 1/4"-20 tripod screw mount. The laser uses a vixen dovetail bracket that mounts to the bottom vixen rail of an SCT. The laser is used solely to point the OTA…
This bracket holds a small laser and mounts it to a vixen rail. The laser is used solely to point the OTA at the artificial star and turned off once accomplished. See part one for the Hubble Optics Artificial Star bracket. PETG, .8mm…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
Build in 2 parts so makes easier to print and give a good finishing on both, just divide it in objects when slicing
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
Parralax or Focus wheel for Vector Optics Sentinel-x Pro 10-40x50 scope. Hardware needed: 1x M3 Bolt and Nut. It is fiddly to add the bolt and nut because I wanted a design that hides the nut and bolt as much as possible. Any feedback is…
Shims for my VectorOptics Frenzy 1x20x28 Reflex sight, which uses the TEK footprint pattern. Mounted my sight on my Chiappa Rhino and found that the height over bore meant I had almost completely used up my vertical adjustment. Comes in 1…
Gridfinity 1X3X3 filled box modified to hold the Fixit Sticks Scope Jack and Optics Bubble Set. Been working on the bench top tool kit and wanted to have these items as part of plan.
Rear cap for Vector Optics Paragon 4x. Use Flex filaments
Fits my SW 5906, printed in PC carbon fiber blend, has survived 20+ rounds of target ammo and 10 of +P. 1st one was printed on a Prusa Mini+ and I was surprised how well it printed the carbon fiber. Needs just a cleanup with a fine file…
The BrickScope - a simple but powerful platform for microscopic discovery. BrickScope is a system of 3D printed parts that can be used to make a real, working microscope at minimal cost and no specialised skills. The BrickScope parts are…
Probably there are better ways to do this (teflon film for example), but this mod is still better than stock. Main benefit is that if you have a 3d printer you already have all the parts. Completely degrease the focuser shaft and focuser…
So, stock TS-Optics (GSO) monorail focuser has plastic body with those stupid curves and 0 extra holes. I didn't want to remake the whole part, so i came up with this. Print this part, add two M4 threaded inserts and sandwich it on top of…
Snap shut case with flush mount access to potentiometers and switches. Holes placed directly over LEDs for acrylic light pipes should you be interested. http://www.grandideastudio.com/opticspy/ Print instructions Category: Electronics
Scope Cap for Objective end of Scope. Specifically fits Customized model for the Athlon Optics Ares ETR 4.5-30X 56mm.
Can be used for many things. I developed this to be used as a Infant Optics DXR-8 housing to mount to the ceiling.
Thanks to this holder, you can fix Ocean Optics spectrometer to any board. I used mini foam tape to make it tight and absorbing vibrations, but it is not necessary. From the side there is option for inserting a press nut (M3), then USB…
OPTICS JIG FOR LASER ANGLE TESTING Modeled and created for two of my lovely students competing in an optics-based competition! Triangles are 45-45-90 with two 0.5 cm indents to model laser pathways once struck by mirrors. These can be…
Model is of protection cap that fits between Reddot Vector Optics SCRD-M67 Frenzy plus (yes, they will enhance the character count in the future) forward end. Print in TPU95a. Notches on sides are for fuddling in the protection canvas so…
Same as before, but now with täggtiggäl 1 point sling attachment to feel like Jason Statham Model is of protection cap that fits between Reddot Vector Optics SCRD-M67 Frenzy plus (yes, they will enhance the character count in the future)…
Model is of protection cap that fits between Reddot Vector Optics SCRD-M67 Frenzy plus (yes, they will enhance the character count in the future) REAR end. Print in TPU95a. Notches on sides are for fuddling in the protection canvas so the…
I have designed this mounting shoe to be able to feet finder scope to my telescope. It matches the curvature of the telescope perfectly, as you can see in the pictures. Printed 4 perimeters to achieve stiffness, 25% gyroid infill on my…
This is a project I have been working on for a while. I want to first extend my thanks for the original model, which can be found here: https://www.thingiverse.com/thing:2336754 This kit is designed to work on the Vernier Physics Track.…
This is my first attempt of making a jig for my middle school students to use during the Optics event of Science Olympiad. In that event, they are to place mirrors and predict where a laser beam will go. They have only a few minutes to…
Hi, i designed this 3D model for the U shaped sensors based fiber optics as myself worked on a tubidity meter and salinity meter for water constant monitoring, this 3D model helped us fix the sensor for better accuracy and precision as…
Was using BigG2016 bottom lock for about 1 month now. I printed like 10 of them and lost each one. Thought to myself there has to be a better way and just need to keep the slider from moving so came up with this. Won't lose the printed…
Accommodates standard 1.25" telescope eyepieces up to 1.84" dia (46.8 mm) and 3 to 4.5" length (75-115mm). WIDER than the original model to fit eyepieces with wider bodies. TALLER (30mm additional usable) and MORE THREAD ENGAGEMENT than…
This is a 0.8 MOD gear 65T for the 3" V-Power focuser of William Optics, that is intended to be used with Tilta Nucleus-M wireless lens motor (https://tilta.com/shop/nucleus-m-motor-kit-i/ ) for wireless focusing control, or ZWO EAF…
Lens caps for the Vortex Optics Solo Monocular 8x36. They just friction fit into place.
A set of mirrors to mount on top of the Vernier angle ruler . Mirrors with different curvatures should reflect laser pointer light in a different ways. You can use cloudy water in a glass, smoke or vape steam to visualize laser pointer…
The sample plate tightly fits around the rail slider. Making it usable as a replacement base as well as a replacement sample plate. Also I included the rail holder as a separate stl so you are able to add your own attachments. I also…
Housing to protect the mirror of an TS-Optics Off-axis Guider 16 mm while storage with no other parts are mounted on the guider. Models for the 42 mm and 48 mm adapters. Printing ~ 23 grams. Print in PETG, Nozzle 0.4 mm, Layer height 0.2…
The Packed Optics HB-7+ is a upgraded Lens-Hood for the well loved Nikkor 80-200mm f2.8 ED. It fits onto any Lens with the 77mm HB-7 mount. Lets be honest, the stock lens hood sucks, is too small, fragile and ugly. The HB-7+ offers better…
Covers for the front and back lens of the vector optics paragon 1x16 sight. (I previously had marked this incorrectly as 1x18, sorry about that) The two pieces are designed to be joined by a slightly tensioned bungee going through the…
Bahtinov Mask for William Optics UniGuide 32mm
English I purchased a new TS-optics focuser for my skywatcher 200PDS, but when I installed it I found that it required 4 new holes positioned with precision and that the focuser would not completely cover the hole in the tube so there…
Chceš si na svou vzduchovku přimontovat optiku? Tento model je perfektní volba. Pro uchycení doporučuji nalepit epoxidem
This is a low-profile (2mm) plate for optics (Trijicon RMR) for Derya DY9 OR. It is likely to be made with CNC techniques, as PLA print is too weak for firearm use. The plate is intended to be used with 2BME inserts .
The blaster needs to be supplied with compressed nitrogen gas or dry air with a pressure of roughly 80 psi. The air flow is split into a high-pressure and low-pressure (20-25psi) line with a secondary gas regulator. A trigger mechanism…
Printed cover for Vector optics Frenzy Plus 1x18x22 Red Dot (SCRD-75) Printed in PETG-HF on X1C v.5 tighter fit will stay on till you want to pull it off
This is a stereoscopic optics for raspberry pi camera. This allows to map two images (left, right) to one camera image. It is possible to put it on a VR-headset to have stereoscopic vision. I tried it with a google-cardboard-like Phone-VR…
Halterungen um eine PTZOptics G2 Kamera auf einem Balken oder an einer Traverse zu befestigen. Kameramontage über die drei metrischen Gewinde oder über das 1/4 Zoll Stativgewinde. Infos zur Traversenmontage: - Konstruiert für Traversen…
This is a variety of accessories that clip onto a Hubble Optics brand Dobsonian. I designed it for the 16" which uses 40mm wide angle iron - other sizes may or may not use the same size angle iron. If they don't, let me know the…
For use with "ADE Advanced Optics IWB Holster for Sig P365/P365 SAS/P365X/P365XL" . I purchased the holster from this link: https://www.amazon.com/gp/product/B09KNZ1GC6/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts:…
This is a cheek riser that clips onto the Magpul Zhukov folding stock for AK pattern rifles. It is designed to put your eye in line with a micro red dot optic mounted on an RS Regulate mount. It holds up just fine with light use but I…
Designed for 0.25 mm layers and to print without any support when oriented as modelled. Cylinder diameter is 31 mm, with four ridges that protrudes another 0.5 mm. The brim is 3 mm high and comes in diameters of 35, 40 and 45 mm with plug…
Parallax wheel for VectorOptics Veyron 3-12X44FFP Rifle Scope is 52mm diameter ring to help focusing. It is a snug pressfit to scope parallax adjusting knob.
Torx key handle for scope torx screws (T15). Fits torx key that is supplied with scope. Much nicer to use than plain metal torx. When printing add pause to end of layer +7.64mm and insert key mid-print. Key has to be inserted snugly to…
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four…
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and two M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The scope's tube…
This bracket holds the Hubble Optics artificial star and mounts it to a standard 1/4"-20 tripod screw mount. The laser uses a vixen dovetail bracket that mounts to the bottom vixen rail of an SCT. The laser is used solely to point the OTA…
This bracket holds a small laser and mounts it to a vixen rail. The laser is used solely to point the OTA at the artificial star and turned off once accomplished. See part one for the Hubble Optics Artificial Star bracket. PETG, .8mm…
This is an optic mounting plate made for the CZ P10s, but should work for the P10c and P10f as well. It fits sights that conform to a C-More or Vortex Razor profile. It was directly tested with the Primary Arms GLX RS-15 sight, but there…
You will need an M3 screw (7mm) and an M3 nut. You need to set a pause in the slicer to insert the nut during printing.
William Optics Wedge adapter for ZWO TC40 tripod Category: Hobby
This is a replacement dust cap designed specifically for the William Optics UniGuide 32mm Guide Scope. Whether you've lost your original cap or just want a spare to keep your optics protected from dust and scratches during transport, this…
PROTOTYPE, PROJECT Aborted Picatinny Rail Mount PROTOTYPE. Umarex UX SPA60/100. Clamps on, does not hold "Zero" if not glued on, will shift when firing. Does not block Iron Sights. I ended this project because of unsatisfying results with…
PROTOTYPE, PROJECT Aborted Picatinny Rail Mount PROTOTYPE. Umarex UX SPA60/100. Clamps on, does not hold "Zero" if not glued on, will shift when firing. Does not block Iron Sights. I ended this project because of unsatisfying results with…
Build in 2 parts so makes easier to print and give a good finishing on both, just divide it in objects when slicing
Remix of https://www.thingiverse.com/thing:6612556 made by MrDeath_X1 "Arms" removed compared to original design Redesigned to be printed in TPU in mind. The little "slot" at the top should be able to slide into the Omega red dot and…
A unique 3D printable creation — this Telescope Focuser Dust Cap, 2 Inch Size, Keeps Optics Clean Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…
A unique 3D printable creation — this Telescope Focuser Dust Cap, 2 Inch Size, Keeps Optics Clean Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…
A unique 3D printable creation — this Telescope Focuser Dust Cap, 2 Inch Size, Keeps Optics Clean Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…
A unique 3D printable creation — this Telescope Focuser Dust Cap, 2 Inch Size, Keeps Optics Clean Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested…
This mount attaches an ASIAIR Plus controller to a William Optics MiniCat 51 WIFD telescope. While the scope's tube clamp provides a location to mount the controller, this mount repositions the controller so USB cables attached to the…
Basic Vortex Logo. Prints easily with standard profiles. Adjust size and settings to your liking
Scope Throw Lever with a 42mm inner diameter. Loosely inspired from https://www.printables.com/model/507645-clamp-on-throw-lever-for-athlon-btr-gn2-scope but these don't fit my scope, so I completely design it by my own. The knurling and…
This is a rigid cover for the secondary mirror on the Hubble Optics UL18 dobsonian telescope. The "mount" portion screws into the secondary holder using the pre-existing screw holes, and the cover simply screws on over that. Printed in…
Based on JakeJake's Universal phone tripod mount, this screws into the UTA of the Hubble Optics UL18 to allow easy use of your phone either as a reference or as part of the push-to systems. Still requires the nut from jakejake's original…
After searching and trying many other models for Continental or Veyron model scopes, they just never sat right. The knurling pattern used on the Sentinel is different and so the ring always sat on top of some teeth. After a few versions…
Parralax or Focus wheel for Vector Optics Sentinel-x Pro 10-40x50 scope. Hardware needed: 1x M3 Bolt and Nut. It is fiddly to add the bolt and nut because I wanted a design that hides the nut and bolt as much as possible. Any feedback is…
ARD built for the Vector Optics Sentinel-x Pro 10-40x50 scope with an integrated mount for the SCACD-22 screw in bubble level. I suggest using 1 strip of black electrical tape to line this. It prevents plastic scuffs to the scope and adds…
Smaller Profile full Parallax Wheel for Vector Optics Sentinel-x Pro 10-40x50 scope.
Nice looking parallax wheel. Quick and easy print. You will need a ~8mm M2.5 bolt and nut. The nut can be inserted after the print is completed and since it sits on the inside of the wheel, the entry hole will not be visible once mounted…
Simple quick to print ring, to allow easy zooming on the Vector Optics Veyron Scope, or any other scope with 30mm caps. You will need a ~8mm 2.5M bolt and nut. The nut can be inserted after printing. I printed it with Formfutura's…
A low-cost optics kit developed for remote instruction. The kit uses 3D printed parts, 38mm diameter optical components, a cloth tape measure and a flashlight from Harbor Freight. Cellophane tape is placed on the flashlight for diffusion…
Vector Optics Maverick optic adjustment screw. Friend lost one of the two, so designed temporary replacement (and what is temporary most of the times become permanent). There is added thread, most of the time printer won't be able to…
Please note this mount should only be used in the first few months. Once the baby can move around in the crib this mount and camera can be a Danger if knocked and fallen on them. Also the power cable can be a choking hazard. So use…
This is a wall mount for the Infant Optics 360 degree camera. Its ring on top measures 67.5mm so other cameras and things could be placed on top of it. The power cable is a tight fit, but it does fit provided you angle it properly when…
This is a door sign from the AppleTV show Severance for the Optics and Design department. I scaled this down to 50% to print on my MK3S+ at a decent size. Use prusaslicer to add a color change layer for the lettering.
A remix of this excellent print: https://www.thingiverse.com/thing:5331416
Disclaimer - This is a proof of concept digital design only. This digital design is for learning purposes only. This digital design is not for production. Bahtinov Mask WIlliams Optics 110 Triplet. Add adhesive felt tape around the inner…
This is a cover that fits over the eyepiece of the Vortex Recce Pro HD 8x32 monocular. Why? The stock cap works well while you're carrying it on you, but if you toss it into a backpack or suitcase it will invariably pop out. The monocular…
This is an adjustable stand for an Infant Optics DXR-8 Camera. The camera usually cannot angle down low enough and so this stand allows it to be adjusted to get a better view of the crib. It's ideal for travelling as it allows the camera…
Designed for Vector Optics Maverick GenII (SCRD-12II). v4 front: This new variant has the polycarbonate piece at a slight angle to avoid reflections from the emitter, especially indoors with high illumination levels. Either a friction…
This simple model is a 2mm light slit, designed to be printed with an Ender 3. The part is 13x6x17.7 cm, and can easily block light from a smartphone flashlight or LED to create a thin sheet of light.
# Picatinny siderail adapter ### Description/ Instructions This adapter allows you to mount your Soviet siderail mounted optics to western picatinny rail interfaces. There are 3 adapters included, one for a vertical picatinny rail, one…
This is a remix of the Prusa US version face shield. I extended the length of the frame to allow more room for magnifying loupes wear for dentists, I also closed the top part. Included with the design is the original chin piece and a…
A simple 2 piece design that allows on demand wall mounting without having to leave a big bulky mount on the wall. Designed for use in school gyms and auditoriums. Includes hot shoe mounts for any accessories. For us, its for a wireless…
Change the “UTADiameter” parameter with the diameter of your telescope tube for it to fit your tube. I tested this for diameters from 4" to 25", so it should work for any telescope tube in between. I use this same adapter on my 10"…
may need minor sanding but the parts should push fit together snugly and not need anything else to secure it. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 15%…
Compact and stiff mount to put a William Optics guide scope onto an Askar 600 astrograph.
This is a Bahtinov mask with an integrated lens cap for the Lacerta 72/432 ED refractor. This is the same scope as the William Optics Megrez 72ED, or Levenhuk Ra R72 ED, so it will fit those, I added the clean lens cap without text for…
A holder above the worktop for a microscope camera from aliexpress, described as 36Mpix (it will probably fit others where the lens is of this type, on C-mount). camera bought here: https://www.aliexpress.com/item/32827892872.html plus a…
