1 / 4
Infant Optics Baby Monitor Camera Adjustable Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adjustable stand for an Infant Optics DXR-8 baby monitor camera
- Rating
- 5 / 5
- Likes
- 23
- Downloads
- 124
- Makes
- 2
- Views
- 985
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
This is an adjustable stand for an Infant Optics DXR-8 Camera. The camera usually cannot angle down low enough and so this stand allows it to be adjusted to get a better view of the crib. It's ideal for travelling as it allows the camera to sit on any flat surface and has a hollowed out section in the base for more weight to be added. I used steel ball bearings to add weight but anything heavy can be used. I printed with 15% infill with Hatchbox PLA and it works great.
Hardware
- 40mm M3 bolt and M3 hex nut for connecting the hinge piece
- 12mm M4 bolt and M4 hex nut for the camera attachment mount
- 2x 1 1/16 inch (27mm) steel ball bearings or BBs for adding weighting to the base so it doesn't tip over