William optics Uniguide 32 Dust Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
William optics Uniguide 32 Dust Cap
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 42
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution
This is a replacement dust cap designed specifically for the William Optics UniGuide 32mm Guide Scope. Whether you've lost your original cap or just want a spare to keep your optics protected from dust and scratches during transport, this print provides a snug and secure fit.
It is designed to fit the front objective of the 32mm UniGuide slide-base guide scope commonly used with the RedCat 51 and other refractors.
Printing Recommendations
Material: TPU (95A) is highly recommended for this print. The flexibility allows for a tight friction fit that won't scratch the scope body and won't fall off in your gear bag.
Alternative Material: If printing in PLA or PETG, you may need to scale the model slightly (±1%) depending on your printer's tolerance to ensure a good fit, as these materials are rigid.
Layer Height: 0.2mm standard or 0.16mm for a smoother finish.
Infill: 15-20% (or 100% if you want it completely opaque to block light).
Supports: No supports required if printed flat face down.
Compatibility
William Optics UniGuide 32mm Slide-Base Guide Scope