William optics Uniguide 32 Dust Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
William optics Uniguide 32 Dust Cap
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 42
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution
This is a replacement dust cap designed specifically for the William Optics UniGuide 32mm Guide Scope. Whether you've lost your original cap or just want a spare to keep your optics protected from dust and scratches during transport, this print provides a snug and secure fit.
It is designed to fit the front objective of the 32mm UniGuide slide-base guide scope commonly used with the RedCat 51 and other refractors.
Printing Recommendations
Material: TPU (95A) is highly recommended for this print. The flexibility allows for a tight friction fit that won't scratch the scope body and won't fall off in your gear bag.
Alternative Material: If printing in PLA or PETG, you may need to scale the model slightly (±1%) depending on your printer's tolerance to ensure a good fit, as these materials are rigid.
Layer Height: 0.2mm standard or 0.16mm for a smoother finish.
Infill: 15-20% (or 100% if you want it completely opaque to block light).
Supports: No supports required if printed flat face down.
Compatibility
William Optics UniGuide 32mm Slide-Base Guide Scope