1 / 2
ASIAIR Plus Mount for William Optics Ultra-Cat 108 — image 1
1 / 2

ASIAIR Plus Mount for William Optics Ultra-Cat 108

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Mount an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope

Rating
0 / 5
Likes
2
Downloads
15
Makes
0
Views
132
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope.

The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The mount can be used on either side of the scope.

This was printed in PETG at 0.2mm STRUCTURAL and default slicer settings; support enforcers were used on the bottom edge of the ASIAIR platform.

Tags