1 / 2
ASIAIR Plus Mount for William Optics Ultra-Cat 108 — zdjęcie 1
1 / 2

ASIAIR Plus Mount for William Optics Ultra-Cat 108

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope

Ocena
0 / 5
Polubienia
2
Pobrania
15
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope.

The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The mount can be used on either side of the scope.

This was printed in PETG at 0.2mm STRUCTURAL and default slicer settings; support enforcers were used on the bottom edge of the ASIAIR platform.

Tagi