Liczymy pasujące modele…
That's a simple mount for my ASIAir Plus fit for tripod with 44mm diameter legs. It fits a bit tight, you can hear crackling sound when stretched, but nothing broke during few tests. Mount with device attached does not slide down on steel…
Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Infill: 20% Filament brand: Prusament Filament color: Black Filament material: PETG
The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…
The ZWO ASIAir come with a Vixen-style finder foot attached to the side of the ASIAir body for easy attachment to Vixen-style finder bases. This is a 3D printed version which also fits to the Pegasus Astro Uranus Meteosensor or PowerBox…
This bracket allows easy attachment of an ASIAIR Pro to your Dovetail plate. Specifically I have a William Optics ZenithStar Telescope bracket, but I believe all of the plates are identical. I printed on my Prusa Mini with the standard…
ZWO ASIAir Tripod Mount - ZWO TB40 Category: Hobby
Since I have made myself a dummy so I can make some wire holder/clamps or something like that, I thought hey, why not share it. Maybe some other people will make some awesome gadgets for it :) Credits: Antenna by Bieber Alexis…
What it is A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps. Tested on Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit…
This model was designed in OnShape All parts sliced with PrusaSlicer 0.20mm layer height with 0.4mm nozzle 15% cubic infill Print 2x strap pieces in TPU Print bracket in PLA To Assemble: - 4x M3 brass inserts to attach the TPU parts. - A…
This model was designed with OnShape. Bracket to hold a Samsung T1 (1Tb SSD) to the side of a ZWO ASIAir Pro Printed with TPU Sliced in PrusaSlicer at 0.2mm layer height, 0.4mm nozzle 15% cubic infill
Remix of AstroStock's 2pc Tripod Leg (51mm or 2in) Bracket to allow attaching the ASIAIR by it's dovetail for easier removal of the ASIAIR from the tripod leg. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No…
If you find my designs useful, please consider sending a tip ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like me, you're…
My RPi ASI POWER Clone board for Astronomy compatible with indi-asi-power driver on Stellarmate or Astroberry Wiring diagram and PCB on EesyEDA Web control interface for ASiair (RPi 3) version. on github This web interface can be used in…
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and two M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The scope's tube…
Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100 . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like…
This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four…
This mount attaches an ASIAIR Plus controller to a William Optics MiniCat 51 WIFD telescope. While the scope's tube clamp provides a location to mount the controller, this mount repositions the controller so USB cables attached to the…
Explorer Scientific ASIAir Mount that I created as I wanted to reuse the mount on my old ED127. I printed it in PETG to reduce the chance of sagging.
Extension board for ASiair / StellarMate + Dew Heater Controller and Power Hub My extension PCB on EasyEDA Can be used for other popular RPi 3 or RPI 4 astronomy poject (Astroberry or IndigoSky) Source code on Github NOTICE I NOT HAVE ANY…
ASIAIR Plus — bay sized to ZWO's published 102.5 × 70 × 26.5 mm. What it holds ASIAIR Plus — bay sized to ZWO's published 102.5 × 70 × 26.5 mm. The device is held by four corner posts only , with 5 mm of clear air along the middle of…
This is a complete automated flat-panel project for the William Optics RedCat 51 II. The panel swings clear for imaging, closes as a dust cap, and provides dimmable neutral-white illumination for flat calibration frames. An ASIAIR Plus…
A mount for the Samsung T7 to attach to the side of an ASI Air Pro (may fit other ASI Air models) Print in TPU No supports required Designed in OnShape I also have a model for the Samsung T1 SSD here:…
I made this bracket to mount my Asiair Mini to one of the foam covered legs of my Manfrotto 055 Xprob tripod. It should also fit any tripod leg with a diameter of 35mm. I chose to use velcro straps to attach the bracket to the tripod, but…
For everyone, who wants to make some gadgets for their ASIair mini :) + share, if you have made some stuff for it :)
This is an adapter/ mount to connect an ASIAir Plus and a travel router. I printed in PLA with the model at 90 degrees so that the legs stick out to the side. Organic supports were used.
This accessory plate uses the M4 holes on the side of ZWO ASIAIR Plus. It provides three ways of organizing cables and mounting accessories: using M4 holes in 20mm raster. These holes have chamfers for the flat head of M4 DIN 7991 screws…
this is a snap-on holder for the ASIAIR plus. it may also work for the pro or mini version. the hole in the middle is for a m10 zylinderhead screw. i mounted it on the holder for the dobsonian mount. print with petg 20% infill best wishes h
USB and Power extension hub with ASiair Plus or Pro holder on telescope. Wining diagram and PCB on EasyEDA BOM 1x M4 x 35mm hex head screws 2x 2x6mm self-tapping screws 4x 2.5x4mm self-tapping screws 2x UNC 8#-32*1/2 screws (for 9.25" SCT…
Mini EQ direct USB cable for ASIAIR or Stellarmate BOM RS232 DB9 Male to RJ45 Female M/F Modular Adapter Connector Convertor Extender USB 2.0 to TTL UART Module PL2303 YP-01 2x 2x6mm self-tapping screws RJ45 Connector Phone Cable Line…
Simple Halterung um den tp-link travel router (TL-WR902AC) am AsiAir Pro befestigen zu können. so hat man alles ordentlich beisammen und keine Probleme mehr mit der WLAN Reichweite. Prusa Mini+ Kein Support 0,25mm 4 Böden 4 Decken 2…
ASIAIR mount for CEM26 stock tripod (not literock). Made for my ASIAIR Plus but should work with any similar dovetail. Remixed from the following two models: https://www.thingiverse.com/thing:5235482…
I liked this mount, but unfortunately it didn't fit for my ASIAir Plus, so I changed it slightly. Thank you!
Introduction: I wanted a way of mounting my AAP to my tripod, and then I remembered I have a 3D printer! This clamp mount is a fairly simple, but a secure and effective way of relocating your ASIAir/Pro/Plus to a 1.75" diameter tripod leg…
2 part ASIAIR holder, one part can be fixed with ducktape and the other part can be screwed on
A mount for the Samsung T7 to attach to the side of an ASI Air Pro (may fit other ASI Air models) Print in TPU No supports required Designed in OnShape I also have a model for the Samsung T1 SSD here:…
This allows you to mount the clip onto the dovetail of your ASIAir and clip it to any 32mm diameter tripod leg. I'm sure there is wiggle room for larger diameter legs, within reason.
