ZWO ASIAir Pro Ugreen M.2 NVME plus Vonets Wifi Extender Bracket Asi Air
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 354
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100.
Ideally for mounting on the side holes.
2 verisons, 1 with offset holes, if like me, you're using a cable management solution, having it offset just fits better.
May fit the ASIAir Plus (it's thinner and I dont have one to measure) but may interfere with the USB C / SD card slot - if anyone has the measurements, let me have them and I can make a Plus variant.
Best printed in vertical, cuts down on number of tree supports.
Print Settings: Quality: 0.2 Walls: 4 Infill: 20% Brim: Yes (Personal Preference) Supports: Yes Material: PLA
Print Settings
Printer Brand: Creality
Printer: Ender 3 Pro
Rafts: No
Supports: Yes
Resolution: 0.2
Infill: 20%
Filament: CopyMaster PLA Red
Notes:
Print Settings:
Quality: 0.2
Walls: 4
Infill: 20%
Brim: Yes (Personal Preference)
Supports: Yes
Material: PLA
Category: Physics & Astronomy