Search results: asiair

39 models

ZWO ASIAir Cable Clip

Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: No Infill: 20% Filament brand: Prusament Filament color: Black Filament material: PETG

Downloads: 890
Likes: 47
Rating: 5

Order a print of this model

PrintablesGyoenastaader

The hole pattern is 4xM4 20 mm cross. Matches the hole pattern on the bottom of the ASIAIR. Instead of mounting the air straight to the mount, you can mount the saddle and shoe the ASIAIR comes with. You'll need one M4x20 screw and nut…

Downloads: 418
Likes: 34
Rating: 5

Order a print of this model

PrintablesCharles

ZWO ASIAir mini Cable Clip

Adjusted to fit the Asiair Mini.

Downloads: 394
Likes: 26
Rating: 5

Order a print of this model

PrintablesTych0

ASIAir+ Tripod Mount

Introduction: I wanted a way of mounting my AAP to my tripod, and then I remembered I have a 3D printer! This clamp mount is a fairly simple, but a secure and effective way of relocating your ASIAir/Pro/Plus to a 1.75" diameter tripod leg…

Downloads: 338
Likes: 31
Rating: 0

Order a print of this model

Printableschvvkumar

ASIAIR iOptron CEM26 Tripod mount

ASIAIR mount for CEM26 stock tripod (not literock). Made for my ASIAIR Plus but should work with any similar dovetail. Remixed from the following two models: https://www.thingiverse.com/thing:5235482…

Downloads: 204
Likes: 10
Rating: 5

Order a print of this model

Printableslyconsys

Synta / Vixen Style Dovetail Mounting Foot for ZWO ASIAir-Plus / Pro / Pegasus Astro

The ZWO ASIAir come with a Vixen-style finder foot attached to the side of the ASIAir body for easy attachment to Vixen-style finder bases. This is a 3D printed version which also fits to the Pegasus Astro Uranus Meteosensor or PowerBox…

Downloads: 167
Likes: 7
Rating: 0

Order a print of this model

Printablesnotzeeg

ASIAIR Mounting Bracket for Dovetail Plate

This bracket allows easy attachment of an ASIAIR Pro to your Dovetail plate. Specifically I have a William Optics ZenithStar Telescope bracket, but I believe all of the plates are identical. I printed on my Prusa Mini with the standard…

Downloads: 151
Likes: 12
Rating: 5

Order a print of this model

Printablesjszewczyk

ZWO ASIAir Tripod Mount - ZWO TB40

ZWO ASIAir Tripod Mount - ZWO TB40 Category: Hobby

Downloads: 117
Likes: 17
Rating: 0

Order a print of this model

PrintablesAndy McKay

ASIAir Tripod Mount - 32mm Clip

This allows you to mount the clip onto the dovetail of your ASIAir and clip it to any 32mm diameter tripod leg. I'm sure there is wiggle room for larger diameter legs, within reason.

Downloads: 111
Likes: 8
Rating: 0

Order a print of this model

PrintablesSabLei

ZWO ASIair Plus - dummy

Since I have made myself a dummy so I can make some wire holder/clamps or something like that, I thought hey, why not share it. Maybe some other people will make some awesome gadgets for it :) Credits: Antenna by Bieber Alexis…

Downloads: 105
Likes: 9
Rating: 0

Order a print of this model

PrintablesDamian Nowak

(SVBONY, ASIAIR, ONSTEP etc.) Vixen rail accessory clamp, 20 mm M4 pattern

What it is A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps. Tested on Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit…

Downloads: 92
Likes: 16
Rating: 0

Order a print of this model

PrintablesMachvolum

ASIAir Plus Mount

I liked this mount, but unfortunately it didn't fit for my ASIAir Plus, so I changed it slightly. Thank you!

Downloads: 86
Likes: 8
Rating: 0

Order a print of this model

PrintablesMatt

ASIAir mount for TC40 Tripod

This model was designed in OnShape All parts sliced with PrusaSlicer 0.20mm layer height with 0.4mm nozzle 15% cubic infill Print 2x strap pieces in TPU Print bracket in PLA To Assemble: - 4x M3 brass inserts to attach the TPU parts. - A…

Downloads: 68
Likes: 8
Rating: 0

Order a print of this model

PrintablesMatt

Samsung T7 - SSD mount for ASIAir Pro

A mount for the Samsung T7 to attach to the side of an ASI Air Pro (may fit other ASI Air models) Print in TPU No supports required Designed in OnShape I also have a model for the Samsung T1 SSD here:…

Downloads: 51
Likes: 4
Rating: 0

Order a print of this model

PrintablesMatt

Samsung T1 - SSD mount for ASIAir Pro

This model was designed with OnShape. Bracket to hold a Samsung T1 (1Tb SSD) to the side of a ZWO ASIAir Pro Printed with TPU Sliced in PrusaSlicer at 0.2mm layer height, 0.4mm nozzle 15% cubic infill

Downloads: 41
Likes: 6
Rating: 0

Order a print of this model

PrintablesSlegnor

ASIAIR Dovetail 2pc Tripod Leg (51mm or 2in) Bracket

Remix of AstroStock's 2pc Tripod Leg (51mm or 2in) Bracket to allow attaching the ASIAIR by it's dovetail for easier removal of the ASIAIR from the tripod leg. Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No…

Downloads: 39
Likes: 3
Rating: 5

Order a print of this model

Printableshyiger

ASIAir Synta Mounting Bracket

Recommend printing in PETG, PLA will warp in the sun.

Downloads: 34
Likes: 4
Rating: 5

Order a print of this model

PrintablesSlegnor

ZWO ASIAir Pro Ugreen M.2 NVME Bracket Asi Air

If you find my designs useful, please consider sending a tip ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like me, you're…

Downloads: 27
Likes: 1
Rating: 0

Order a print of this model

PrintablesRoman Hujer

RPi POWER Board for ASiair 1.0, StellarMate or Astroberry

My RPi ASI POWER Clone board for Astronomy compatible with indi-asi-power driver on Stellarmate or Astroberry Wiring diagram and PCB on EesyEDA Web control interface for ASiair (RPi 3) version. on github This web interface can be used in…

Downloads: 26
Likes: 3
Rating: 0

Order a print of this model

PrintablesMarcin

AsiAir Plus mount 44mm tripod leg

That's a simple mount for my ASIAir Plus fit for tripod with 44mm diameter legs. It fits a bit tight, you can hear crackling sound when stretched, but nothing broke during few tests. Mount with device attached does not slide down on steel…

Downloads: 24
Likes: 1
Rating: 0

Order a print of this model

Printablesdnl42

ASIAIR Plus Mount for William Optics Ultra-Cat 108

This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and two M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The scope's tube…

Downloads: 16
Likes: 2
Rating: 0

Order a print of this model

PrintablesSlegnor

ZWO ASIAir Pro Ugreen M.2 NVME plus Vonets Wifi Extender Bracket Asi Air

Remix of my ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure and the Support extender WIFI Vonets - ASIAIR pro by mat05100 . Ideally for mounting on the side holes. 2 verisons, 1 with offset holes, if like…

Downloads: 14
Likes: 2
Rating: 0

Order a print of this model

Printablesdnl42

ASIAIR Plus Mount for William Optics Ultra-Cat 108

This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope. The controller is mounted horizontal relative to the telescope. The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and four…

Downloads: 14
Likes: 2
Rating: 0

Order a print of this model

Printablesdnl42

ASIAIR Plus Mount for William Optics MiniCat 51 WIFD

This mount attaches an ASIAIR Plus controller to a William Optics MiniCat 51 WIFD telescope. While the scope's tube clamp provides a location to mount the controller, this mount repositions the controller so USB cables attached to the…

Downloads: 12
Likes: 3
Rating: 5

Order a print of this model

PrintablesSolarity

Explorer Scientific ASIAir Mount

Explorer Scientific ASIAir Mount that I created as I wanted to reuse the mount on my old ED127. I printed it in PETG to reduce the chance of sagging.

Downloads: 7
Likes: 1
Rating: 0

Order a print of this model

PrintablesRoman Hujer

Extension board for ASiair / StellarMate + Dew Heater Controller and Power Hub

Extension board for ASiair / StellarMate + Dew Heater Controller and Power Hub My extension PCB on EasyEDA Can be used for other popular RPi 3 or RPI 4 astronomy poject (Astroberry or IndigoSky) Source code on Github NOTICE I NOT HAVE ANY…

Downloads: 7
Likes: 1
Rating: 0

Order a print of this model

PrintablesTarun Pulikanti

ASIAIR Plus Field Case — with microSD bank and antenna cradle

ASIAIR Plus — bay sized to ZWO's published 102.5 × 70 × 26.5 mm. What it holds ASIAIR Plus — bay sized to ZWO's published 102.5 × 70 × 26.5 mm. The device is held by four corner posts only , with 5 mm of clear air along the middle of…

Downloads: 5
Likes: 0
Rating: 0

Order a print of this model

PrintablesTarun Pulikanti

RedCat 51 II Automated Flat Panel for ASIAIR Plus

This is a complete automated flat-panel project for the William Optics RedCat 51 II. The panel swings clear for imaging, closes as a dust cap, and provides dimmable neutral-white illumination for flat calibration frames. An ASIAIR Plus…

Downloads: 3
Likes: 1
Rating: 0

Order a print of this model

Printables

ZWO ASIAir mini Cable Clip

Adjusted to fit the Asiair Mini.

Order a print of this model

Printables

2 part ASIAIR holder, one part can be fixed with ducktape and the other part can be screwed on

Order a print of this model