(SVBONY, ASIAIR, ONSTEP etc.) Vixen rail accessory clamp, 20 mm M4 pattern
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple two‑point clamp for standard Vixen rails. Top face has 2× M4 mounting holes at 20 mm spacing for accessories
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 94
- Makes
- 0
- Views
- 480
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
What it is
A compact two‑point vise for Vixen dovetail rails. Top face has 2× M4 holes at 20 mm spacing for small boxes and controllers. It clamps.
Tested on
Omegon ProRC 6" Carbon with doubled stock Vixen rail (up&bottom). Should fit other Vixen‑style rails.
Fits
SVBONY SV241 power box, OnStep v5 by TerransIndustry, and any accessory using 2× M4 @ 20 mm C‑C. Possibly AsiAir boxes too. And other power boxes.
Hardware (BOM)
- 2× M3×50 socket head screws
- 2× M3 square nuts (5.5x5.5x2mm)
Optional thin rubber/TPU pad on the jaw for glossy rails
Printing
Material ASA for UV/heat/cold/extra strength. No supports. 0.2 mm layer. 6 walls. 6 top/bottom. 70% infill gyroid/cubic to protect your pricey gear. Keep the STL orientation to maximize strength, unless you completely trust your prints' inter-layer bonding strength.
Assembly
- Press M3 square nuts all the way, so you can see through M3 holes on the sides.
- Insert M3×50 screws though the vixen_double_mount_sv241_B part. Tighten alternately to the point those square nuts don't fall out.
- Bolt your accessory with 2× M4.
- Slide onto rail. Tighten M3 screws alternately till it clamps on your rail.
- Tug test. If it creeps, add a quarter‑turn. If plastic complains, you went too far.
Load & sanity
For light accessories only. Temperature swings could change clamp bite; re‑check before sessions.
Remix
Default is 20 mm spacing. Remix for other patterns if needed; label files clearly.
Changelog
v1.0 — first release, 20 mm M4 pattern.