1 / 1
ASIAIR Plus Mount for William Optics Ultra-Cat 108 — zdjęcie 1

ASIAIR Plus Mount for William Optics Ultra-Cat 108

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope

Ocena
0 / 5
Polubienia
2
Pobrania
16
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mount attaches an ASIAIR Plus controller on a William Optics Ultra-Cat 108 telescope.

The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case bottom and two M6-1.0x10mm screws for the Ultra-Cat 108 tube mounts. The scope's tube mount only allows this to be used on the left side of the scope.

This was printed in PETG at 0.2mm STRUCTURAL and default slicer settings.

Tagi