1 / 1
ASIAIR Plus Mount for William Optics MiniCat 51 WIFD — zdjęcie 1

ASIAIR Plus Mount for William Optics MiniCat 51 WIFD

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount an ASIAIR Plus controller on a William Optics MiniCat 51 WIFD telescope

Ocena
5 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
88
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This mount attaches an ASIAIR Plus controller to a William Optics MiniCat 51 WIFD telescope. While the scope's tube clamp provides a location to mount the controller, this mount repositions the controller so USB cables attached to the controller don't foul the EFW (filter wheel) when a CAA (angle adjuster) is used.

The mount uses two M4-0.7x8mm screws for the ASIAIR Plus case side and two M6-1.0x10mm screws for the MiniCat guide scope mount. This mount can be oriented with the ASIAir Plus on the either side of the guide scope.

This was printed in PETG at 0.2mm STRUCTURAL and default slicer settings.

Tags

Tagi