ZWO ASIAir Pro Ugreen M.2 NVME Bracket Asi Air
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 368
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you find my designs useful, please consider sending a tip
ASIAir Pro bracket for the Ugreen 10Gbps M.2 NVMe SATA SSD Hard Drive Enclosure. Ideally for mounting on the side holes.
2 verisons, 1 with offset holes, if like me, you're using a cable management solution, having it offset just fits better.
May fit the ASIAir Plus (it's thinner and I dont have one to measure) but may interfere with the USB C / SD card slot - if anyone has the measurements, let me have them and I can make a Plus variant.
Print Settings: Quality: 0.2 Infill: 40% Brim: Yes (Personal Preference) Supports: Yes Material: PLA
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
**Rafts:**
No
Supports:
Yes
**Resolution:**
0.2
Infill:
40
**Filament:** CopyMaster PLA Red
Notes:
Print Settings:
Quality: 0.2
Infill: 40%
Brim: Yes (Personal Preference)
Supports: Yes
Material: PLA
Category: Physics & Astronomy