UCG Fiber 10in Rack
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
UCG Fiber 10in Rack
- Rating
- 4 / 5
- Likes
- 18
- Downloads
- 102
- Makes
- 1
- Views
- 865
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Modified FruitieX's model. Removed superfluous hex patterns that make it hard to print and block the SSD port. So now the SSD port accessible, and you can have the fiber face whatever direction you want instead of just one. Also enlarged the rear mounting holes to accept most M3 threaded heat-set inserts. Anything around 4.6mm diameter and 5.6mm depth should work. I used these – https://www.amazon.com/dp/B08BCRZZS3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_9 (ruthex M3 Threaded Inserts - 100 Pieces RX-M3x5.7 Brass Heat Set Insert for Plastic Parts - Metric knurled Nuts - Insert by Heat into 3D Printing Components).