Counting matching models…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
A minimal stand to hold the Tuya Smart Life Zigbee Matter Hub Gateway in a vertical position on a desk or shelf. Hub measures 90mm x 20mm. Two versions, one with two screw holes 120mm apart. No supports needed. Print as pictured.
Something to mount the Tuya Smart Life Zigbee Matter Hub Gateway to a wall. Mount keeps hub slightly away from wall for additional cooling. Hub measures 90mm x 20mm. Four mounting options to pick from: Matter Smart Hub Wall 40mm CS: Two…
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
This version of the UXG-Lite mount is designed with mounting points that work with the IKEA SKÅDIS series of pegboards. NOTE: You will need to print additional parts. The model here holds the UXG-Lite itself, but does not include the…
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
The “OpenHeat Gateway – Smart EMS Integration for Maker” allows you to connect and read data from your gas boiler via the EMS bus. It provides a simple way to integrate your heating system into a smart home environment (e.g. Home…
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…
Modifizierter Halter für das Tado V3 Gateway zur Befestigung an IKEA Skadis. Einfach ohne Support druckbar, dank optimierter Skadis Befestigung. Modified Tado V3 holder for IKEA Skadis. Easy print without support cause of print optimated…
After going through the surgery of opening my G5AR and attaching the tiny IPX connectors to provide external antenna access, I was a little worried about a mishap where an antenna cable got pulled with sufficient force to disconnect them…
I designed this to mount ZigStar Lan Gateway to the Ikea Skadis system. Currently there is only an opening for the USB-C port. If you need it for the LAN port as well, I have added the step file for customization. I used the Skadis T-Clip…
This Dragon Guardian Temple Entrance features a massive sculpted dragon head carved into stone, its mouth forming a dramatic stairway leading into a dark shrine interior. With curling horns, layered scales, fierce fangs and ornamental…
Bring timeless grandeur to your tabletop or display with this Grand Roman Triumphal Arch . Inspired by classical Roman architecture, this monumental gateway features detailed Corinthian-style columns, carved relief panels, and an ornate…
This is a holder for the Unifi Cloud Gateway for Multiboard. It is attached to the wall using two Small Thread Fix Points with the following Flush Snap Small Thread Holes. It is best to use Longer Small Thread Fix Points. It can be…
Bottom half of the housing from Marcel without ethernet opening
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
A unique 3D printable creation — this Dimensional Portal Gateway Tested on 8+ FDM printers. Download and print immediately. **What's Included:** - STL File - 3MF File - OBJ File - Print Guide with tested settings **Specifications:** -…
The RAKwireless WisGate Edge RAK7268 indoor gateway comes with a multi-purpose mounting plate for wall mount or DIN rail mount. But in my case, I wanted the gateway placed on the table. This simple, 30 minutes print, stand uses the…
Hier bekommt ihr eine 19" 2HE Rack Halterung für den Waveshare RS232/485/422 TO POE ETH (B) Adapter. Ein Modbus TCP Gateway mit PoE Anschluss. Ich nutze ihn um eine Heidelberg Enrgy Control Wallbox mit eine Fronius Symo Gen24…
4x4 puzzle designed in onshape, adaptation from a Fusion360 design
10" rack tray for the Ubiquiti Cloud Gateway Ultra/Max gateways. Model is split in 3 parts (tray, left- & right mount) to be printable on smaller print-beds. The left mount also contains a slot for a Keystone jack. The mountings are…
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Added recess for Command Strip (small poster) mount. Added hole for mounting. Flattened section to create a “bottom” for alternate orientation while printing. Added friction “bumps” to the side to add grip for dongle. Note: Using this…
Držák zigbee brány Woox R7070. Tisk: Vrstva: 0.2 Perimetry: 2 (tisk z perimetrů) Material: PLA, PetG, ABS, ASA… ----------------------------------------- Woox R7070 zigbee holder. Print: Layer: 0.2 Perimeters: 2 (print from perimeters)…
Perfect fit for SKÅDIS mount for Ubiquiti Unifi Cloud Gateway Ultra. Does not block any I/O. Requires 2x Skadis T-Clip System - Low Profile Flush Mount Clips No support needed Printed with PLA with default setting
This is an M2 drive caddy for the for the Ubiquiti Cloud Gateway Max (UCG Max NS) with no storage built in. I printed this in ABS with 100% infill, just to have something for the screw to bite in to. I used a random pc screw i had lying…
This model is for a Verizon Business Gateway (router) compact wall mount. This is NOT the same as the home version of their gateway which there are other wall mounts available for. I designed this to hug the wall pretty closely with a…
Lorcana Gateway - Box Inlay An inlay to fit all the game components of the game into the original box, especially sleeved cards. There is enough space in the trays to add cards from booster packs later on. The card trays for the player…
A Medieval looking door i designed to see if i like painting :). There are some more “door” examples available to download, i used these to inspire me. But.. i found the “to realistic” stones and planks a hastle to print with to many…
A 10 inch rackmount for unify clout gateway ultra particularly stable Flat base on the front of the housing Integrated space for housing feet Precise fitting of the housing Clips to prevent it from being pushed out Printing possible…
Wall mount bracket for the Cloud Gateway Max. The Max, unlike the Ultra, has cooling vents along the base so I simply added clearance for airflow.
Stack to allow you to manage your Cloud Gateway Ultra and Lite 8 POE switch
This bracket allows the Cloud Gateway to be mounted in various positions. All interfaces of the UCG Ultra are accessible. The SSD of the UCG Max is not accessible. The ventilation slots of the UCG Max are also largely unobstructed. The…
Wall mount bracket for Ubiquity Cloud Gateway Max or Ubiquiti Cloud Ultra. Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. I included another model “key” that can be…
Housing for Olimex ESP32-GATEWAY with Ethernet, microSD and USB cut-outs. Several variants are available: - with or without cut-out for cables to the GPIO pins - with or without OSHW logo - with or without screw holes One box requires to…
The mount was not big enough for my T-Mobile gateway, so I embiggened it for the "FAST 5688W" model. Printed with 40% infill and fuzzy-walls in PETG. I suggest mounting one side into a stud and the other with a wall anchor. You could…
This is a cool gateway its SANDED for aged lock prints in 20min 0,3 use adaptiv for more details use Fit overhangs for no support 2meters of Filament paint as you like looks great in PRUSAMENT Marble have fun
A wall mount holder for the Sonoff Zigbee Gateway. No Supports needed. Works for me in PLA.
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Printed with 2 walls, 15% rectiliniar infill and tree supports. Gives a nice discreet mounting option for the Ikea gateway that is still easily accessible.
I measured the mounting feet on the modem and made some feet that securely slid in and locked in place, then put it on a random L bracket I found. The antennas should be facing a certain way, so it's not just mounted to the wall at a 90…
Simple zigbee gateway holder. Internal space is 65x25mm and holes for screw have 3mm. https://x.com/3Dpetr_kolos
A diy version of the Ubiquity floating mount 17cm for compact gateways. Required 60x10x3mm bar magnets x5 M3 or M4 countersunk screw x4 In the slicer add a pause at the 3.6mm layer height or layer 18 if using 0.2mm layers. The layer right…
I needed a wall mount for my Cloud Gateway Max's PSU so I made this. It's designed for the #6 screws I had on hand, but you could probably get away with another kind. The screw hole is 6mm. I printed mine in PETG for the extra flexibility.
Warning: Downloading AI-generated models may result in spontaneous combustion of your hard drive, existential crises, and an overwhelming urge to replace your coworkers with chatbots. Of course, if it’s for ‘educational purposes,’ then…
The Cloud Gateway Max gets hot! Do not print in PLA!
I made this model to have a perfect fixed position for my water meter gateway sensor on my Elster/Honeywell v200 water meter. There comes a holder with the gateway but it is one size fits all and I found it hard to have it in the right…
This model was originally on Printables where the creator posted his .step file for editing. It's been mixed a few times but as the smaller Max and Ultra Unifi models. This is for the Unifi Cloud Gateway Fibe r unit. It's a wall mount…
This is a box for the Nilan Gateway. All credits to all people that worked on this https://www.facebook.com/groups/667765647316443 https://github.com/jascdk/Nilan_Homeassistant made with https://www.thingiverse.com/thing:1264391 Print…
Wall mount bracket for Ubiquity Cloud Gateway Fiber (ucg-fiber). Gateway snaps into base and is held very tight. Exposes gateways ventilation slots. Slot to assist with removal. If you prefer to have a printed version of the model, please…
Simple and invisible mounting bracket for the Plejd GWY-01 Gateway
Putting it at 4000% size should make it a lot more workable. This model will be slightly different than the picture due to rendering, but maintains the detail and basic shape.
This rack mount kit is designed to house the Ubiquiti Cloud Gateway Ultra. It features both a Keystone jack plate as well as a Flat plate. The window cutout is perfect for still being able to access the CGU's screen info. The Cloud…
A simple and minimally-decorated gateway, ready for use as an entrance to a keep or as a portal to worlds afar. Extra smoothing either digitally or post-printing is recommended. Note: This file is not scaled, but is intended to be printed…
This is designed to mount a Unifi Express Gateway to a 10in server rack. It doesn't need supports, though it will require bridging, and will be a fairly snug fit. After printing remove bridging on the back to make room for ethernet and…
A 10" Rack mount for the Ubiquiti Gateway lite, along with keystone jack ports for rerouting of cables. A remix of the original model by Chris Everhart. This is a quick and dirty remix by a novice (My first remix, in fact!), so mind some…
Engelsk: Mount for Ubiquiti Cloud Gateway Ultra (Unifi UCG Ultra) This mount is specifically designed to securely hold your Ubiquiti Cloud Gateway Ultra (also known as the Unifi UCG Ultra) in a practical and efficient way. With this…
A minimal stand to hold the Tuya Smart Life Zigbee Matter Hub Gateway in a vertical position on a desk or shelf. Hub measures 90mm x 20mm. Two versions, one with two screw holes 120mm apart. No supports needed. Print as pictured.
UCG-Fiber stand that raises the device a bit for better airflow.
Remixed towilab's design to allow for access of the UCG max's SSD port. Made the L-portion of the ‘clip’ on the right side a bit more aggressive while removing the left side one entirely, allowing super secure retention despite only…
https://www.thingiverse.com/thing:4441076 presented a thumb screw to replace the wing nut on the front-left corner of the BIBO bed. It is too wide for the other two positions. I have created a smaller version to fit the right-front corner…
Created from scratch to allow me to make my own rack mount. I wanted to leave gaps for the vent holes and potentially the storage bay too. I've taken all the measurements myself on a UCG-Max and while I've made every effort to get them…
Snug fit which should hold the router in snuggly without needing to force the router in. SKÅDIS and screw mount variations available. Screw mount is designed for 3 mm screw. I haven't printed the screw version. Screw hole is designed with…
remixed this shelf by @HenryCrete_1056952 into a rack mount for the 3-D printable rack, Mod10 by MandicReally. Why? idk takes up 3U
Something to mount the Tuya Smart Life Zigbee Matter Hub Gateway to a wall. Mount keeps hub slightly away from wall for additional cooling. Hub measures 90mm x 20mm. Four mounting options to pick from: Matter Smart Hub Wall 40mm CS: Two…
These brackets were designed to mount the Ubiquiti Cloud Gateway Max and power supply in a trailer at any angle so it has to be mounted securely without relying on clips. The brackets have 4.5mm mounting holes for #8 pan head screws.…
Print 1:1 - PLA - module with designed interface of our other module (pin and hole) so keep the ration as indicated to fit into other modules or change ration to all of them equally. (More models on our Tinkercad, gradually we will upload…
3D Printed 10" Network Rack Mount for Ubiquiti UniFi Security Gateway As part of my classroom network setup project, I’m building 10" 3D-printed racks for my students. They'll be configuring and testing real-world networks, gaining…
The screw pattern piece is disposable; it just makes marking where the screws go in the wall a little easier. I hope you like ❤❤ this model! Happy Printing!! 🎉🎉
I really liked the original ESRack system design created by @EvilProphet . I created a module for Gateway Yubii Home from the ESRack Customizable Device Mount by @DavidKahler_64887 The ESRack system includes the following components:…
This printable enclosure is purpose-built for the expLORA GATEWAY LITE (ESP32-S3, LoRa 868 MHz, USB-C). Give your hub a sleek, ventilated shell that keeps the radio clear, the antennas upright and your wiring tidy—perfect for desks,…
Rack Mount for Unifi Cloud Gateway Ultra, with 3x RJ45 Jacks
Someone in the comments of the original asked for a version with only 2 keystones, so here it is!
This is a Silvercrest Zigbee gateway module for LabStack The Silvercrest pcb is larger than the mounting holes in a LabStack plate so the pcb is recessed in a way that allows you to insert the pcb diagonally in, and once it is inserted…
This is only my third 3D print. I made the adjustments using TinkerCAD. I used PETG filament and an Anycubic Kobra S1 printer.
You can easily upgrade an older ESP-EMS Gateway from an ESP8266 to an ESP32, which is totally worth it when you want the latest Home Assistant integration. It is described here:…
I had a breakage - so added some strength, it's a lot more stable. Great work on the ES Rack Series as a whole though !
My version ended up a bit tight. Maybe it's because of ASA shrinking. Maybe because of the slight warp. But maybe it's just a bit tight. The screw holes are for M4 screws. I decided to mount the device with it's “top” surface towards the…
This is a candle mold for a Starlink gateway visible in sites around the world. I made it based on photos from them on trucks and adjusted to make it more moldable. I've left the dimensions to be the full size version so you can shrink it…
Got board browsing and didn't really want to spend $160 for someone to print it for me. Your Abode Gen 2 Gateway now has a home on your Minilab in a somewhat convenient 10-inch 2U format. If you are like me and only have a shrimp-sized 3d…
Will this fit your laptop with a different model number? Maybe, if the opening is ~82mm X 30mm. I printed it with PLA because it's what I had that isn't black: 0.20mm nozzle 0.2mm layer height 15% infill (Gyroid for no specific reason) No…
Basic wall mount for a Tuya Gateway hub. Friction fit so the hub just pushes in. Print in whatever material you like, photos are PLA+. 15% fill is plenty strong enough.
No curveballs on print settings for this one. Any layer height should work, but I print in .2mm. This model does require supports for the flanges that hold the UCG down. I use organic supports that I painted on within Prusaslicer. .F3d…
The Gateway To connect a Photovoltaic inverter to a SmartHome-environment the Github user @TobiasFaust developed the great project SolaxModbusGateway - big thanks to him! His Gateway is composed of a ESP32-board and a RS485…
Print in matt black PLA for best quality. Find more about the open source project here: ESP32-GATEWAY/README.md at master · OLIMEX/ESP32-GATEWAY You can buy the box from here: BOX-ESP32-GATEWAY-F and support the development of more open…
I made a wall mount that fits my new UniFi Cloud Gateway Fiber in a 90° rotated orientation (the screen automatically rotates). It fits perfectly on all sides and doesn't block the ventilation or the NVMe SSD storage compartment. Due to…
Bracket to mount the Unifi Gateway Lite on a wall.
This model is part of my simple castle town series. It features two guard towers, one ruined and one intact, as well as an open gateway. The plastic figures in the example photos are only there for scale, but the model itself can be…
If you are lucky enough to have an Acorn Stairlift fitted and it has a Comms Gateway, you may want to mount it on the wall. This simple bracket is custom-designed to fit the T715 Comms Gateway for Acorn Stairlifts. Printed in PLA and…
After experiencing several issues with overheating on my Xfinity XB modems, I found that the airflow to cool the device was lacking. Through trial and error, I made several ad-hoc stands to find the right height to allow for the necessary…
The only thing worse that the subscription model, are overpriced accessories that should have been included! I made this for myself, as I will only use it with a 2280. So, if you're are only going to use a 2280 too, have at it. Includes a…
The Unifi Cloud Gateway Fiber device does not come with a wall mount option like a lot of Ubiquiti's devices do. So this model allows you to wall-mount your UCG Fiber. It's designed to allow you to place the device in it with the cables…
I created this as a sort of moonshot project idea after getting my first 3D printer. My goal was to create a scale model of the Gateway Arch by using the same engineering drawings and plans as the original, using Autodesk Fusion as the…
This version of the UXG-Lite mount is designed with mounting points that work with the IKEA SKÅDIS series of pegboards. NOTE: You will need to print additional parts. The model here holds the UXG-Lite itself, but does not include the…
Vertical Stand for Ubiquiti Unifi Gateway Fiber. Print with 0.2 resoultion Minimum 15% infill Add doubleside tape at bottom to improve stability.
Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…
