RAK WisMesh Ethernet Gateway Indoor Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small indoor case for a PoE powered WisMesh Ethernet Gateway based on RAK19007, RAK4631, RAK13800 and RAK19018.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 65
- Makes
- 1
- Views
- 299
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules.
I just used the integrated basic antennas and stuck them to the inner wall of the case – the BLE antenna using the pre-applied sticky pad.
The case features access to the ethernet and usb-c connectors, venting holes for the PoE module, a hole for the reset button and tiny holes for the LEDs.
The PCBs can be mounted using the supplied screws, just screw them into the case directly.
Printed in PETG, 0.4mm, no supports, 20% infill