Counting matching models…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
WisMesh Pocket V2 The WisMesh Pocket V 2 is your go-to device for ready-to-use and long-lasting connectivity. Ideal for users seeking a hassle-free Meshtastic node. This device is powered by the efficient WisBlock solution based on the…
Something nice that you can just drop the tag onto.
This insert is specifically for the WaveShare Solar Power Manager (D) and RAK Wisblock (compatible with 1w) to be used with the 100mm x 100mm x 90mm junction box. The base that holds the batteries replaces the insert that comes with the…
This is a replacement back battery cover with room for two 18650 battery cells. It effectively approximately doubles the device's stock battery capacity. Additional BOM items: Dual 18650 battery holder (parallel connections), I used…
This is a holster for the RAK Wireless Wismesh TAG Meshtastic Nodes There are 2 versions: V1 does not have holes for the clip. It allows you to drill your own depending on your clip. V2 has holes for the standard Baofeng clips. I printed…
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…
If you purchased any RAK Unify enclosures, such as the RAK Wismesh Solar Repeater Mini for Meshtastic, you'll need some mounting brackets. The default kit doesn't include them, so I've made some based on RAK's own design documents. They…
A charging station for your RAK Wismesh / MokoSmart tag, which has cord storage and routing for any edge you choose.
Attach the WisMesh starter kit to the front, two 18650 cells to the back, and slide it in to a 2" ABS pipe to get a weatherproof node you can easily mount anywhere! BOM: About 12cm of 2" ABS pipe 2" ABS cap hub with a 5/8" hole drilled…
This is a case for the rak wismesh 1w booster kit. It houses the RAK3401, RAK13302, and RAK19007 boards. It has spots for a GPS antenna for an optional RAK12501. It has spots to put the BLE and the LORA antennas that come with the kit. It…
This is a variant of the RAKwireless Outdoor Enclosure for WisBlock enclosure , adapted for the WisMesh 1W Booster Starter Kit . The main changes are more space for a larger battery holes on the mounting plate for mounting a small…
WisMesh Board ONE WisMesh Board ONE is a breakout board for the RAK4630, specifically designed for Meshtastic. Unlike other baseboards such as RAK19007, WisMesh Board ONE reduces the number of connectors to compact the board size while…
Outdoor enclosure for WisBlock Modular System with Solar Panel, WisMesh Repeater Mini This enclosure is based on the RAK WisBlock Outdoor concept wide enclosure . The enclosure is not using any gaskets, it is inspired by the Takachi OB…
This is a holster for the RAK Wireless Wismesh TAG Meshtastic Nodes using nuts and bolts to mount the clip I printed mine using PETG. See the zip file for everything including the freecad file which you can use to customize the print. I…
A rough model of the RAK Wireless WisMesh B1 for the purpose of creating cases and such. Updated to have LEDs, buttons, Solar port and battery port.
I created this model in order to be able to fit 21700 battery with WisMesh RAK booster 1 watt. There's a button at the bottom, it's name is SS12D00, can be found on AliExpress. You also need an ipex to SMA cable about 5 cm. The battery is…
Trying to learn FreeCAD. It's capable and probably the only viable option for a hobbyist. But it's hard work to (re)learn! So this is not a very polished model. Please feel free to build upon it and/or give me feedback. This is a mount…
I added an opening on the side for the EXT_5V wiring to come out. Is it on the "wrong" side because I'm dumb or because that's where i needed it? The world may never know (it's because I'm dumb). It works for me, so I'm not inclined to…
Designed to print easily and with minimal material. Some support may be needed in the oval slot, but it worked ok for me without. The 1b base has a small feature to hold the wire.
Alternative enclosure for the RAKwireless WisMesh Pocket V2 The enclosure for the RAKwireless WisMesh Pocket V2 never attracted me. I am more for simple and slim devices. This print realizes my personal taste for a Meshtastic device.…
This enclosure is an alternative for the RAKwireless WisMesh Tap and the upcoming WisMesh Tap V2. EDIT Fixed original model which had a small glitch in the area where the TFT is mounted. It is slimmer and lighter than the original Unify…
I recently acquired a WisMesh Repeater Mini for use in Meshtastic. The vendor also offered adjustable pole mounts, but these were unsatisfactory: they were designed for larger diameter poles, were only as stable as the adjustments locking…
A compact and sturdy PC monitor stand designed for the WisMesh Pocket V2 Ready-to-Use Meshtastic Device. This holder keeps the device upright on top of a PC monitor while maintaining easy access to the screen, buttons, antenna, and…
I took the existing rak 1w case and modified it to use flange-mounted USB-C jacks (w/onboard 5.1k resistors) I had on hand, with captive locknuts, rather than the full USB-PD trigger board the original used.
https://store.rakwireless.com/products/wismesh-meshtastic-solar-repeater?variant=44485612765382 https://www.aliexpress.com/item/1005006482138516.html?spm=a2g0o.order_list.order_list_main.37.6f281802ro7oxn
Goal of this project was to create a case for WisMesh base board from RAK wireless: https://store.rakwireless.com/products/wismesh-baseboard-rak19026 I wanted the case to be waterproof and have a decent battery life. It is something I can…
This is an rain-proof enclosure for RAKwireless WisMesh starter kits. It comes in several versions for RAK19003 or RAK19007 Base Boards, with a clip or with a ring to hook it to a carabiner. The default 2dBi antenna of the starter kits is…
You will need to buy a USB A to USB C with 90 degree bends to fit. Deliberately undersized to give you a little wiggle room.
Checkout my enclosure and accessory collection for RAKwireless WisBlock, WisMesh Meshtastic and MeshCore devices ==> RAKwireless Origins . All my models come with STEP files and Fusion 360 project files for customization.…
This is a version of the WisMesh Outdoor enclosure that uses an N-Type screw antenna connector instead of the usual RP-SMA/SMA antenna connectors. It is designed for smaller antennas with an N-Type connector. It will not work well (or…
A 35° pole-mount remix for the WisMesh Repeater Mini, with captive hose-clamp passages and an alternative screw-mount version. The original bracket provides a useful mounting arrangement, but its open curved saddles allow clamp bands to…
Wismesh Tag mag-safe pouch for phone. lets you stop hanging it from your moms hello kitty ceiling fan chain, finally. i made it with glow in the dark tpu, but this could be made of petg-cf or even used bubble gum if you're clever enough.…
Simple indoor case with clip top for a PoE powered RAK WisMesh Ethernet Gateway. It's based on the RAK19007, RAK4631, RAK13800 and RAK19018 modules. I just used the integrated basic antennas and stuck them to the inner wall of the case –…
If you purchased any RAK Unify enclosures, such as the RAK Wismesh Solar Repeater Mini for Meshtastic, you'll need some mounting brackets. The default kit doesn't include them, so I've made some based on RAK's own design documents. They…
I recently was delivered my 1 watt boosters but couldn't find a good simple case for them, I run my antenna wire outside and keep my radio inside so I just needed something to securely mount the board, keep the antenna from spinning and…
I added an opening on the side for the EXT_5V wiring to come out. Is it on the "wrong" side because I'm dumb or because that's where i needed it? The world may never know (it's because I'm dumb). It works for me, so I'm not inclined to…
You will need to buy a USB A to USB C with 90 degree bends to fit. Deliberately undersized to give you a little wiggle room.
A charging sled that can charge two WisMesh Tags at once. Both cables initially enter through the same hole, then split off to the sides. If you needed to charge more than two, you theoretically could pretty easily chop this up into more…
I made this simple case for the RAK WisMesh Board ONE (B1) with the package-deal 2dbi antenna and OLED screen. The pictures are printed in Polymaker Luminous Green PLA. I'm using a 1100mAh battery to fit in the case along with the board.…
Mounting clip for the RAKWireless WishMesh Pocket V2 via a threaded insert and optional bolt in the base. By default it is configured for a 3/8"-16 threaded insert, which is a standard thread for mounting photography accessories and…
This stand was designed as a companion piece for VelocityOS' Wismesh Tag Charge Cradle . The original cradle works great, but I wanted a vertical layout, so instead of redesigning it from scratch, I created a simple stand to complement…
A charging sled that can charge two WisMesh Tags at once. Both cables initially enter through the same hole, then split off to the sides. If you needed to charge more than two, you theoretically could pretty easily chop this up into more…
This is a basic enclosure for a RAK WisMesh 1W Booster Starter Kit plus a small USB-C power delivery board. A few RAK 1W cases exist on Printables but of the ones that connect to external 5V power, which is required for full transmit…
A simple modular docking for the RAK WishMesh tag that uses the provided chargers. The idea is that you can snap together as many parts as you need, add a faceplate on one end, and stuff a usb hub or something in a cable box on the other…
Remixed clever_1586753 's nice "RAK WisMesh Ethernet Gateway Indoor Case" for an added SMA antenna slot. The PCBs can be mounted using the supplied screws, just screw them into the case directly. Printed in PETG, 0.4mm, 0.2mm layer…
