WisMesh 1W Repeater => small N-Type antennas
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a version of the WisMesh Outdoor enclosure that uses an N-Type screw antenna connector instead of the usual RP-S
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a version of the WisMesh Outdoor enclosure that uses an N-Type screw antenna connector instead of the usual RP-SMA/SMA antenna connectors.
It is designed for smaller antennas with an N-Type connector. It will not work well (or long) with one of the large RAKwireless Fiber Glass antennas.
This is a custom design for a requester here on Makerworld. If you need something special and it is possible to do, please let me know.
Recommended to print in ABS or ASA. PETG might work, but will not last as long. PLA is not usable for outdoors.