Counting matching models…
The People’s Repeater: A low-cost solar mesh repeater design for Meshtastic or Meshcore. The People’s Repeater is an affordable LoRa mesh repeater using harvested parts from a $10 Lowes Harbor Breeze garden light. The design relies on the…
I needed a mount for my AVM FRITZ! WLAN Mesh Repeater 3000 . Dont wanted to stand on the floor. With this you can mount it on the Wall or even Ceiling. This works also for the 6000 Version
Mein erster Entwurf zur Wandmontage meines Fritz! Repeater 3000. Category: Other
Stand for the AVM FRITZ!Repeater 1200 (AX). An Europlug extension cord is needed to fix the repeater to the stand. Make sure the extension cord fits the cutout on the back as they differ in size and shape. I've used this one from REV…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Plants vs Zombies inspired, Peashooter Repeater, Tabletop DnD miniature 25 mm medium base which can be used for DnD…
Ceiling and wall mount for the Fritz! 3000AX Repeater. The 3000AX Repeater is slightly brighter than the non-AX version. update 12.10.2023: added different sizes, for wall mount better use 15mm or 20mm variant.
UPFRONT! I created a Discord channel for my Thermal vision builds but will add a #meshtastic channel there as well in case you have questions or problems. Please remain to the meshtastic channel for all sort of questions as all the other…
UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25 Added Bridge 175 V6 and bridge support lower and upper for 2X T114 and 3065 . UPDATE: 2026-05-18 Added Tall Antenna support for long antennas +80cms with 23mm radius…
Summary This is the one-size-fits-all repeater stand for all the wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a Euro plug extension cable. Compatibility list - all wall plugged AVM Fritz!Repeater (article…
Meshtastic or MeshCore Router/Gateway/Repeater based on Heltec Wireless Stick Lite v3 with additional components: LM2596 DC/DC Step-down Power Supply INA219 DC Current Power Supply Sensor BME280 Temperature, Humidity, Barometric Pressure…
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Wallmount for fritz repeater
The AVM Repeater is designed to be plugged directly into an electrical outlet, but I preferred to attach it to a wall and connect it with a power cord. That's why I designed an alternate back cover. Similar to the original, this back…
ABS no supports. Printed in the same way as it is fixed to the wall.
A compact LoRa SolarNode case that is suitable as MeshCore/Meshtastic® repeater. It offers enough space for up to 4x 18650 cells. 🛠 WORK IN PROGRESS: This project is still work in progress. Some dimensions still might change in next…
The kit allowes to mount a TP-Link Repeater (which is primary for mast mounting) at a wall. No special requirments. I have print it with PETG and 4 perimeters (10% infill). I have use the kit with … TP-Link Pharos Serie CPE210 Outdoor…
The People’s Repeater (N-Mount Version): A low-cost solar mesh repeater design for Meshtastic or Meshcore using the more weather resistant N-Mount antenna connector. All text from here forward is copied over from the standard People's…
Simple hexagonal box for MeshTastic / MeshCore repeater. Suitable for hanging, e.g. on a tree. Suitable for use with six solar panels 110 x 60 mm (6V 200 mA) - glue e.g. with silicone sealant. For connection it is necessary to use 6 M3…
KOTOR blaster with a slot for 19.7mm pipe to reinforce/align the pieces for about 1m long. The blaster is approximately full sized. Magazine is removable with slots for 8x1mm magnets to help keep it in place. Not for commercial use…
ESP-32 Dev Kit C NodeMCU - Cover for WiFi Repeater . Filament eSun PLA+ Black
Cover works on all box versions. UPDATE: 2026-07-29: Added Bridge Support Upper V2 UPDATE: 2026-07-25: Added Bridge 196 V6 and bridge support lower and upper for 2X T114 and 3065. UPDATE: 2026-05-08: Added Bridge (double antenna for two…
This is a easy to print case / enclosure for a Homematic HmIP-PCBS board that can be used as a repeater / range extender for a Homematic IP network. This box is tiny. I used a small piece of double sided tape to glue it to the wall where…
Apex Weapond 30-30 Repeater in 1:1 scale
printed with support.
The Repeater Pro Extended Stock is a 3D-printed upgraded stock for the Dart Zone Max Nitroshot+ Repeater Pro. With a similar design to the original, this replacement increases the stock length for a more comfortable shouldering experience…
Fritz Repeater 3000 AX wall mount For four 4 mm screws Screw distance 60 mm
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Inspiriert durch https://www.thingiverse.com/thing:4676653 , habe den Halter neu konstruiert. Arretiert wird er durch den Euro-Stecker. Beispiel: https://www.amazon.de/gp/product/B0013NAPKI/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1…
Solar Panel Holder + Stevenson Screen from those things i build myself a… Solar Powered, Weather Station! featuring LoRa technology this is a standalone weather station i build. the main point i wanted to achieve is to broadcast the data…
This is an outdoor node that I made that uses a TPU gasket. It fits the Rak, faketek and heltec devices (print the right one) Uses an N type connector and PG7 gland. The solar panel is designed to slot into the Solar carrier and is…
i build some wall mount for my Fritz Repeater 3000 in the middle is some space to hide cables and i used some double sided tape to secure the Repeater on the mount you need 2x : 3,5 x 40 Screws
A protective guard that fits over the side repeater of a Land Rover Discovery 1. I have side repeaters with part number “PRC9916” lenses and these are shown in my photo. You will need supports to the build plate that will be easy to…
Holder for the Aqara G4 chime/repeater unit. Just slot on to the front of your USB plug and pop the chime unit in the top. The STL should be orientated already with the ‘back’ of the model on the print bed - this works well for printing…
Remixed for better printability with a flatt bottom surface.
Mount that Meshtastic repeater on a tree with this enclosure. The insert goes into the housing from below leaving all entries weather proofed inside the protruding shroud of the outer housing. Print with PETG and spray inside of the…
I looked around for a Ham radio repeater mount and I struggled to find one I really liked so I designed this one based on a previous design and I designed the new rear portion to create a more stable platform and provides additional…
Hey there, my first release so dont be to hard with me :) I made an simple walll mount for the Fritz Repeater 3000 AX. I guess it will work for 6000 as well but i dont have one so I cant test it :) On the back there is a chanel for the…
This model of the Terran Republic's TX1 Repeater has been split into parts for your convenient printing. The parts are intended to be glued together. That's all there is to it.
If you purchased any RAK Unify enclosures, such as the RAK Wismesh Solar Repeater Mini for Meshtastic, you'll need some mounting brackets. The default kit doesn't include them, so I've made some based on RAK's own design documents. They…
A compact lightweight 2W solar repeater for Meshtastic. Multiple mounting options are available including a tripod option with included antenna mount. There are a number of requirements to build this node. Specifically: Compatible with…
A clean case for the Fritz!Repeater 3000 (did not test it on 3000AX/6000/6000AX but might fit) I was mad about the shelfs that hold the original case, so I made my own based on the linked model The button will be held in by the button on…
The Repeater Pro Speedloader is a 3D-printed tubular stripper clip designed by Luchathor to quickly reload the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a double-stacked 12-dart capacity, this device fully…
Threw these together because I needed more height for the People's Repeater. I was able to print both of these in ASA without supports. The Painter's Pole Adapter Mount can be printed with supports, but it may take a while to dig them out…
Print Settings Supports: Yes Resolution: 0.2 Infill: 100% Filament material: PETG
This is a variant of the RAKwireless Outdoor Enclosure for WisBlock enclosure , adapted for the WisMesh 1W Booster Starter Kit . The main changes are more space for a larger battery holes on the mounting plate for mounting a small…
Box for meshtastic repeater. Solar panel 500mm ou 2inch pole large zip tie sleeve water tight (rain) 20cm antenna at the bottom Batteries used: 4X18650 on a parallel connection holder Solar panel used: 145X145mm About 500mA GCODE files…
A neat outdoor housing solution for a FritzBox FRITZ!Powerline 1260E WLAN Repeater to extend Wi-Fi to the Garden or Roof Terrace. Print each piece, and assemble as seen in the photos. The All-Weather box used was purchased on Amazon here:…
Outdoor enclosure for WisBlock Modular System with Solar Panel, WisMesh Repeater Mini This enclosure is based on the RAK WisBlock Outdoor concept wide enclosure . The enclosure is not using any gaskets, it is inspired by the Takachi OB…
This is a wall mounting engineered for the AVM FRITZ!Repeater 6000. The design specifications may also be suitable for other network hardware, such as modems or routers, with comparable physical dimensions. Printing Instructions Supports:…
A quick gutter mount designed around the People's Repeater mount. UV-stable filament recommended (i.e. PETG) I used paint-on supports as shown in the attached photos. (organic supports on bed only) I needed to scrape the threads with a…
“Meshtastic” Heltec Lite - Weather resistant with Mounthing Brackets - Tactical Repeater/Node - Recon and Deploy I made the model a bit larger, thus also a "Barometer/Thermometer fits inside the housing, together with the 2x 18650…
IKEA TRÅDFRI Signal Repeater Zigbee extender wall mount small poster Command Strip with hole and dust cap. Files for wall mounted holder and cap set, holder with and without hole and dust cap alone. Edit: Added version with holes only,…
WARNING: I goofed on the part where the swivel snaps in, I'm testing a change now and will update I remodeled the People's Repeater Hub in Blender resulting in a lighter mesh that is centered on the XYZ origin for anyone that wants to…
The Repeater Pro Barrel Collet is a 3D-printed muzzle upgrade designed by Perry for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece O-ring clamp this mod part makes performance tuning easier with…
The Repeater Pro Spring Tuning Spacer Set uses a series of 3D-printed spacers to fine-tune the performance of the Dart Zone Max Nitroshot+ Repeater Pro Lever Action Blaster with the installed spring. This set includes one full-size spacer…
Mount to attach the iliadbox wifi 7 repeater,and possibly freebox Pop repeater as they should be the same but I don't have one to test it with, to the skadis ikea platform. It works both horizontally as intended and vertically, although…
UPDATE V2: I adjusted the length of the foot for better stability and added some material above the plug mount for better strength. The side contours have been adjusted for aesthetics. The RP-AX58 is an excellent value for those who need…
I credit desertblade and candrist for the original inspiration for this cse, but I didn't use their models for my design. I reworked this entire design from original geometry using AutoCAD based on my particular MMDVM hat board (which…
Based on an original rubber gasket (since perished) this is direct replacement part. It's the same dimensions and I suggest you print from a flexible material as this does need to stretch over the plastic housing a little until it's in…
This part replaces the old rear iron sight with a picatinny rail for you to attach your favorite optic! To install, you must take apart the blaster (be careful with alignment), remove the old sight, install the new sight, and close up the…
Covers which fit a popular factory installed RV TPMS repeater dock. The base dimensions are roughly 3"x2.6". There is an 18 degree cover for docks installed at an 18 degree angle so the top face can be vertical. There is a 0 degree cover…
This stand allows to fit a Fritz Repeater 1200 AX into it, plug a LAN cable in from the bottom, power from the back and then point it directly where you want the wifi to be. The model provide enough space around the connector at the back…
The Micro Hub is a compact design the replace the original hub from Black Flag Civilian. You can place it directly into the original wall mount, but for any new installs I would recommend printing the new Tall Wall mount. Update…
Trying to learn FreeCAD. It's capable and probably the only viable option for a hobbyist. But it's hard work to (re)learn! So this is not a very polished model. Please feel free to build upon it and/or give me feedback. This is a mount…
The Repeater Pro “Mare's Leg” is a simple stock point delete for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a filleted design, this grip plug fills the hole left by the removed stock for more comfortable…
A protective cover for the Walksnail repeater. Easy to slide on and off. I've made them in TPU and PETG, both works. If you like my designs please consider donating a coffee or any amount really, I appreciate the gesture.…
The Repeater Pro RedCowl Collet is a 3D-printed muzzle for the Dart Zone Max Nitroshot+ Repeater Pro lever-action blaster. Featuring a two-piece hardware-free clamp using RedCowl's this mod part makes performance tuning easier with quick,…
# Description Designed to set up a european wall-socket wifi-repeater on a desk or a hanger. Upper holes can be used to hang it on the wall. Holes on the bottom can be used to screw it on a wall or upside down. # Material Tested with PLA,…
The screw is used to fix the light fixture to the top of the flagpole. A ornament like ball or eagle will not work with the external alpha 915 antenna. If you want to put an internal antenna inside the light fixture, then you can keep the…
Enjoy and let me know if you have questions or modification requests! Prints with no supports, I recommend printing with ASA, 4 walls and 20-30% infill. Make sure to acetone smooth for a water tight exterior! BOM Heltec V4 main board…
Adapted the USB hole for a better fitting, dimension reduced to make it compact. Is adapted for my board antenna plug, maybe you have to make some adjustments due the antennas are not soldered equal. A remix…
A simple holder I designed to attach a Vonets WIFI repeater to my Jubliee printer. It is a snug fit so the Vonets won't fall out, even if you mount it upside down. Screw holes are designed to accomodate a small flathead bolt as shown in…
The retaining clip of my S2 Lotus side repeater lamp broke off. I didn't want to wait or to pay more in shipping than the price of this repeater. So, I design this clip that slides over the broken one and that is hold in place by the bulb…
It was designed to be printed without supports and with the side that the pole enters on the bed. Depending on your environment I would recommend using a durable heat resistant filament such as PETG or ABS. Additional parts M4 x 16mm…
This is a case that I use for my meshcore/meshtastic repeaters. The base is able to hold a triple parallel 18650 battery holder or a 10,000mAh pouch cell. The top has a mounting spot for 2 seed studio xiao nerf combo radios (I was making…
I recently acquired a WisMesh Repeater Mini for use in Meshtastic. The vendor also offered adjustable pole mounts, but these were unsatisfactory: they were designed for larger diameter poles, were only as stable as the adjustments locking…
This is just a hole filler for the old ON/OFF switch and a glue in mount for a RAK Wisblock mini. I had a few lying around and wanted to use them up before I buy any XIAO boards. You have to cut off the old studs and get them somewhat…
All electronics live in the roof section: an Inhero MR-2 solar repeater board (RAK4630-based, runs MeshCore), a 5×18650 battery pack and a λ/4 ground-plane antenna fully integrated into the roof — radiator through the ridge, four radials…
I damaged the enclosure for my wired tow-mode camera repeater. This is my design for a replacement enclosure. Lid attaches with two M3 screws and press-in inserts. I did have to replace the fakra connectors on the PCB as the existing…
Regenhaube zum Schutz vor Regen
made a small plug for the bottom of the hub to keep bugs and weather out.
The Patriot Lighting spotlight from Menards has very similar internals to its Harbor Breeze cousin (Shocking, I'm sure). They're the same price and effectively the same electronically speaking. However, the solar panel arm has no swivel…
Should be printed with 4- 6 wall layers, requires a bit of force to attach to the gun. Should be pre-oriented to the direction it should be printed, supports are not necessary, but recommended. With how the dart holder is designed, the…
There is a socket for a Bluetooth antenna to increase the range of communication with a smartphone, which will increase the height of the antenna placement. You will need insert nuts m2 - 6 pieces m3 - 4 pieces screws m2x12 - 6 pieces…
The lights on my Fritz Mesh Repeater bothered me, so I created this model to cover up the lights. There are two versions with different tolerances on the locing part. It should be compatible with all Fritz WiFi repeaters of that design,…
https://store.rakwireless.com/products/wismesh-meshtastic-solar-repeater?variant=44485612765382 https://www.aliexpress.com/item/1005006482138516.html?spm=a2g0o.order_list.order_list_main.37.6f281802ro7oxn
cache pour protéger le répéteur wifi en extérieur , il y aura un ajustement au niveau de la prise suivant vos réglages d'imprimante mais rien de bien grave ( je décline toute responsabilité en cas de détérioration de votre matériel se…
I couldn't find any dart storage for the front of the Repeater Pro so I created my own that mounts to the top picatinny rail from two generic Picatinny models. I printed 5 walls 20% fill and supports are nessesary for the under side of…
Made a mount for the repeater to be strapped onto a drone. Two variants using one or two straps. Use magic foam or similar for good fit between mount and drone. Printed in PETG. Mount together with CA-glue. Repeater is mounted using a…
These are the prints related to the video below and my solar powered meshtastic repeater. The prints are the mounts I created to mount to the flag pole, and to mount the solar panel to the box. Links to hardware used:…
Zip ties version for round and square pole
Demo Video: Adjustable length is from Dart Zone stock to OOD extended stock, I will also update this to include a longer version if requested by a comment. (+2.5in from Dart Zone stock) Print Settings: This model is made for 0.2mm layer…
Eine Deckenmontage für einen Ubiquiti Repeater oder Access Point gemeinsam mit dem PoE Adapter. Also nur Netzstromanschluss nötig. Mit Stützstruktur drucken. 50% Infill
Takes out most of the repeater pro trigger slop. I also have a video on my youtube page showing how to improve the trigger pull. Enjoy!!! Printed at .16 in PETG 5 Walls. https://youtube.com/shorts/Gm_4AGzfKmY?is=MEerBOf8-A3t5yg3
Designed this very simple Panasonic VL-FKD2 Repeater Mount which uses the repeaters holes in the back to lock it securely on the mount. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm…
A case for an infrared receiver. The devices re-transmits any IR remote signal over the internet using Wifi, TCP/IP, and HTTP. Modules used: ESP8266 and IR Receiver/Transmitter pair Micro-controller:…
I've got one of the 868Mhz Meshcore repeaters with the 5.5db 40cm antenna but it came with a pole mount bracket and I needed wall mount. I've made this wall mounting bracket with an offset to hold it away from the wall and up a bit so…
Meshcore repeater box for Seeed Studio XIAO ESP32S3 & Wio-SX1262 Kit
You will need: Solar yard light from Harbor Freight a drill and bits for antenna mounting hole 4x m3 x 4 socket head screws (heltec v3 version) m4 x 16 to 20 button or socket head screw m4 nut This is the first release version of a…
