MeshTastic / MeshCore solar repeater box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple hexagonal box for meshtastic/meshcore repeater
- Rating
- 5 / 5
- Likes
- 58
- Downloads
- 176
- Makes
- 2
- Views
- 2,003
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Simple hexagonal box for MeshTastic / MeshCore repeater. Suitable for hanging, e.g. on a tree.
Suitable for use with six solar panels 110 x 60 mm (6V 200 mA) - glue e.g. with silicone sealant. For connection it is necessary to use 6 M3 hot melt nuts and six M3 screws. Inside the lower part there is a grid of holes (10 x 10 mm) for mounting internal accessories (depending on the internal device used).
repeater_box (upper part) no requires supports.
repeater_down (bottom part) requires supports and printing flat side down.
You can have a look at this https://www.petanovo.cz/meshcore-opensource-komunikacni-sit/ (Please translate it from Czech to your language).