1 / 6
UCG Fiber (Unifi Cloud Gateway Fiber) 10 inch Rackfinity mount Prusa Mini compatible — image 1
1 / 6

UCG Fiber (Unifi Cloud Gateway Fiber) 10 inch Rackfinity mount Prusa Mini compatible

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling.

Rating
5 / 5
Likes
15
Downloads
52
Makes
0
Views
1,194
Reviews
1

Updated at source:

Model information

Category
Computers
License
Creative Commons — Attribution

A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see the 3mf files from this model: 

It is recommended to print this in PETG since the UCG gets quite hot. Assembly requires:

  • 6x M4x20mm screws (to screw in the back pieces and the back plate in).

  • 6x M4 nuts for the above screws.

  • 4x M4x8-10mm screws for the front panel (screwed into plastic, can be replaced with M3 heat set inserts and M3 screws).

  • 2x M3x30mm screws for the top pieces in the back.

  • 2x M3x4x4 heat set inserts.

  • 4x M5 screws to screw into the rackfinity rack.

If you also want to assemble the fan piece you'll need the following:

  • NF-A4x10 40mm fan (I used USB from another thing in the rack to power it).

  • 2-4 M3x4x4 heat set inserts.

  • 2-4 M3x25mm screws to screw in the fan.

  • 2-4x M5 screws to screw in the printed pieces into the rack.

All screws are of the countersunk variety to sit flush with the prints.

Tags