UCG Fiber (Unifi Cloud Gateway Fiber) 10 inch Rackfinity mount Prusa Mini compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 1194
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
A Rackfinity compatible holder for the Unifi Cloud Gateway Fiber. With an optional external 40mm fan for cooling. Can be fully printed on a Prusa Mini or other 180mm^3 printer. For details on how to fit the prints on small pinters, see the 3mf files from this model:
It is recommended to print this in PETG since the UCG gets quite hot. Assembly requires:
6x M4x20mm screws (to screw in the back pieces and the back plate in).
6x M4 nuts for the above screws.
4x M4x8-10mm screws for the front panel (screwed into plastic, can be replaced with M3 heat set inserts and M3 screws).
2x M3x30mm screws for the top pieces in the back.
2x M3x4x4 heat set inserts.
4x M5 screws to screw into the rackfinity rack.
If you also want to assemble the fan piece you'll need the following:
NF-A4x10 40mm fan (I used USB from another thing in the rack to power it).
2-4 M3x4x4 heat set inserts.
2-4 M3x25mm screws to screw in the fan.
2-4x M5 screws to screw in the printed pieces into the rack.
All screws are of the countersunk variety to sit flush with the prints.