FIBER-PUNK Node Prusa Shell Remixed
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fiber-Punk Node is a wifi option for 3D printers, Remixed Ribbon exit for Prusa Printers.
- Rating
- 4.5 / 5
- Likes
- 9
- Downloads
- 78
- Makes
- 2
- Views
- 964
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Fiber-Punk Node is an easy and affordable way to control and monitor 3D printers via WiFi, USB-enabled serial, and SD I/O. Node is very robust and power-efficient as it runs on an MCU (ESP32) while still offering a wide range of functionalities. Including Sentry mode that detects Print failures, and filament runout.
This is an open source project details included in the link below.
Instructions:
Just print the included STL's as well as the lower half and re-route the SD card included ribbon cable out the side of the NODE shell facing the Sd card on the Prusa display board.
I have printed this case on multiple machines and it works seamlessly with the lower half of the case.
- remember to print both parts of the case !
Fiber-punk info:
https://github.com/fiberpunk1/Beam-ESP32
Original case stl's :
https://github.com/fiberpunk1/PrintShell