1,739 models
This is a remix of this bag clip: https://www.thingiverse.com/thing:4027950 which goes back to https://www.thingiverse.com/thing:3238736 . Modifications are: 1) The insert has two stops. One prevents it from falling into the bag and the…
Print approx. €3.92–€4.79 excl. taxPreliminary estimate for one variant
I had a lot of issues with the prusa original files&settings on my MK3s printers - perimeters did not stick, so lots of stringing on the inside for example. I modified my settings according to tips from Stefan of CNCKitchen and now print…
Print approx. €15.25–€18.63 excl. taxPreliminary estimate for PETGSource material: PET
This is a modified version of Lndnny's Deburring Tool Case 150mm (AFA Tooling) - Rugged Box Style . A fantastic case for the hexagon handle. This lower insert is modified to accommodate the Round Aluminum Knurled handle version. I haven't…
Print approx. €2.68–€3.28 excl. taxPreliminary estimate for one variant
Upload of my project from thingiverse since thingiverse has become trash! Want to try non-planar printing but don't want to remove the fans from your printer or bother setting up Slic3r Non-Planar. Try this! Using 60c bed temp and 200c…
Print approx. €1.26–€1.54 excl. taxPreliminary estimate for one variant
This is a modified version of this : https://www.printables.com/model/70791-einsy-door-with-fan but with different fan location more centered on the stepper drivers side. This replaces the einsy door on an MK3S.
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Especially when in use with the MMU3 community edition, there is more space to the top. A wider radius on the bowden bend leads to a smoother loading procedure, what enhances reliabilty of material changes Additionally I found it helps a…
I modified the body of the crossbow so that it is able to shoot 36mm finishing nails. I also added a handle to the main body, and increased the thickness of the crossbow arms. I also added a window so you can see how many shots are left.…
4 different versions of our basic slight modifications of the excellent Prusa headband design, that we are using to print for the NHS in West Scotland. These are optimised for less material and faster printing in recognition of the…
Here is a mod to showcase the use of the Saturn 2 Riser project . This allows pass though of the InkBird temperature sensor and power for a fermentation belt to be a vat warming system. requires 2 m3 bolts and nuts. The outlet section of…
I modified the xl version of the wind-up knob (aufzieherxl_pla.stl) and the driver (mitnehmer_pla.stl) of the original wind-up Bathtub Boat v5 because the knob kept slipping out. The shaft the knob is sitting on is now longer and it just…
A modified Xplorer frame for the Polybar and Minibar. I rounded the horn on the fretting hand side so I would stop hitting it while sliding up on the neck. I've included both a right-handed model and a wrong-handed model.
A modified insert for the " Rugged Multipart Pinecil Case V2 " (large version) to store only the Pinecil and its USB cable. Since I don't have space for the optional soldering iron holder in my printed case, I removed the clamps for that…
Birdhouse pictured here was printed using Overture Super PLA+, and has a Blink outdoor camera mounted to the inside of the roof with double sided tape.
I printed the original fan bracket and had to pull the fan wires out of the strain relief feature. Didn't really feel comfortable letting the wires dangle like that. All I did was add a cut near the position of the power wires. Now you…
Just a quick mod to the 6pod section to mount to a 5 gallon bucket lid using 4x M5 bolts and matching nuts. Printed in petg for better temperature resistance and layer adhesion over pla.
I love having more complicated looking bits on my pack, and I like the look of the Dale resistors with the arms on them, so wanted to bring one back.
This is a remix of https://www.printables.com/model/675738-baseball-hat-hanger. This version allows for using 3M Command Strips to mount to the wall. The recess for the screw hole is still visible as I left it to save a little filament…
Did a quick update to the locking cone as I wanted to print this face-down without supports, and I wanted a nice flat first layer. Please give lots of love to the original source of this excellent project! Category: 3D Printer Parts
modified insert for Stealth Press ZERO for Sequre SQ001 iron - I guess the SQ001 is a little fatter than a TS100!
German: Modifizierte Version für DN40 Rohre und Adapter. Kann auch für PVC-Kugelhähne verwendet werden siehe Bild. Der Hebelel wurde modifizert das der Magnet leichter rein geht und das er im offenen Zustand nicht mehr am Verbinder…
The back plate file included with the original model package doesn't allow for excessively tall SFP modules such as the WAS-110. I've removed the top portion of the back plate to give enough clearance for the WAS-110's large heatsink (and…
Remix of TimMJN's great resistor (and diode) lead bender. This mod does not address functionality, which was great to begin with, only ergonomic issues. TimMJN's original design was very functional and does a great job bending resistor…
Printed with Nobufil ABSX - 0.2 mm layer height and 75% infill for higher strength and durability.
I built the Modified WordClock Case and Stand , but the stand that came with it was too unstable, so it kept falling over. Therefore I designed these little feet that are visible at the front, but provide stability.
While printing the various boxes from Leon_H's Frosthaven Insert, I found that there were a few assumptions made about some cards that wouldn't be sleeved that caught me by surprise. Since I've sleeved the entire game, I wanted to see…
I really like this filament clip design. It is the best I've seen as it is easy to use, holds well etc. However I wanted to use it in a slightly different way. I have a lack enclosure that has filament fed to it via ptfe tubes coming out…
This is a remix of mklements Lab Rax 10" server rack - bolted version. Whenever I installed new equipment into the rack, I got annoyed of the M6 bolts always getting pushed all the way through and falling to the bottom. So I designed this…
It's possible to print these in PLA using the same instructions found in the original model that this one remixes. But the keycaps in the pictures were printed using MJF and PA12-HP Nylon (dyed black) from JLCPCB.
I have been having a field day organizing my tool chest drawers with gridfinity, and I had been deliberating over how to organize my drill bits for quite a while. The tool chest I have only has about 50 mm vertical clearance in the…
I opened one side of the box for the side cutter. I can't use the longer version of the box, because of the mounted anti vibration foot. The model is for the right side of the printer. To mount the box on the left side, use the “mirror”…
This is a modified end of a Williams upkicker solenoid. The design is deeper than the original, which means the ball settles in faster and hopefully avoid situations where the ball is still moving when the game fires the upkicker, often…
Modified grippers for better pick up of samples for FTC Into the Deep Samples. I am only uploading the grippers as I do not have the entire original model. Will give credit to original creator when it is provided. Version 5-2 provides a…
This is my very first post so suggestions for doing this better are welcome. I added the ridge as a separate file in case you have trouble getting this to fit. This file [Slide with Ridge] should be printed separately at 0.12 layers in…
A stackable calibration cat. Maintains the calibration dimensions from the original. This modei is original size, but can be rotated 90 degrees.
🧰 Title: Coin holder & COB flashlight 2-in-1 — for Ukrainian Hryvnia coins 📄 Description (English for Printables): This is a hybrid coin holder and COB flashlight , designed specifically for Ukrainian iron coins: ₴10, ₴5, ₴2, ₴1 . 💡…
ratcheting screwdriver without the ltt logo. i used tree supports for the whole model. use 100% infill for the ratchet and the bit holder. turn on detect thin walls so that the bit holder and the ratchet print correctly because otherwise…
The main difference is that I extended the stem 10mm so that the pug mount sits back further. I didn't like how sharply you had to bend the tool-head connector to plug it in on the original. I also cut one of the corners off to make its…
Micron R1 minisb modified to accept nozzle leds. For example from Fysetc.
The original mainboard of my Packard Bell Pack-mate 486 computer suffered from broken traces due to a battery leak. Original replacement parts are hard to find and other LPX-type mainboards sometimes have a different distance between the…
I wanted to be able to pose my character's arms more freely, so I redesigned them for that purpose! Arms are intended to be printed in TPU; the torso can be whatever material you want. You will need: One paperclip, to insert into the arms…
I wasn't lucky with that nice hinges from nadir. It was because my workspace is so tiny that I can't let the doors open during PLA printing. With closed doors, the heatbreak gets clogged after max. one hour of printing because the cooling…
Modified grippers for better pick up of samples for FTC Into the Deep Samples. I am only uploading the grippers as I do not have the entire original model. Will give credit to original creator when it is provided. Version 5-2 provides a…
I have two problems with the stock mercury one.1 tower: They stick out from the back and under heat and stress they bend, this make the belt rub on the idler, causing excessive wear and tear. The latter could be explained by my poor…
Hello XL makers! This is a Remix for the Prusa XL Y-Carriage for toothed Idler Pulleys with a width of 10mm. I have written a detailed article about this, which deals with Gates' manufacturer recommendations:…
Update 12/25: I added a threaded version. Use that if you don't trust the press fit between the two parts. The thread is equivalent to an M10 threaded bolt. ---- Update 12/25: Ich habe eine Version mit Gewinde ergänzt. Das Gewinde…
Created to take up less space and be more efficient. Can hold 1lbs or .5kg comfortably. Cutting board measurements are in centimeters. Print Settings: Wall Count: 2 Infill Density: 50% Printing Speed: 60mm/s ( HIGHLY RECOMMENDED for bed…
ratcheting screwdriver without the ltt logo. i used tree supports for the whole model. use 100% infill for the ratchet and the bit holder. turn on detect thin walls so that the bit holder and the ratchet print correctly because otherwise…
This model was completely redrawn after the original version I printed broke at the glued joint after only a few uses (obviously, my glue wasn't great). I combined the base and upright backing ring into a single part in a way that…
This is a modified version of a balance board stand, specifically adapted for the Bredder Balance Board and a larger roller . The base is wider and deeper for improved stability, and wall thickness has been increased to support heavier…
Now you can open the chest by pushing the key (or any Stick, pen...) into the keyhole. Use Top and Bottom Part of original Design. This only replaces the internal lever. You need also four M3 Screws and Nuts. I used M3x30mm screws.…
If the shaft of the rollers breaks easily because of poor layer adhesion use these rollers and a M8x40 hex bolt.
I only modified the case, base plate and other parts were printed as per the original. The modifications to the case were such that I could re-use some parts out of my accessory box. The modifications were done in ORCA Slicer from the…
This Mod moves the location of M3 screws further inside the XZ Block so that the Screw can be screwed directly to the profile without going through the Linear Rail.
I love truck & tractor pulls, hence why I made this model. Assembly instructions are in a PDF. I used 1.8mm brass rod for the axles. Tires can be optionally TPU. If there's any problems, let me know! I wanna make this as easy to…
Edit: This mod is confirmed to not conflict with the Core One+ automatic vent control. This is a remix of the excellent nozzle wiper by Ed and PCR, which adds a slot to use a spare M3nS nut from the Core One assembly kit to fix the part…
I really liked the "Solder Station Brass Wool Holder" by Spock, but the scrap metal I wanted to use as weights for the base didn't fit into the provided cutout. I therefore modified the base, hollowing it out to offer lots of additional…
its v1 with a gun arm and wings separated for people without ams
Ready to print with .2 mm layer height (need to add support for the drums on the bottom side). Also needs 4 PCS 608 Skateboard bearings. I advise you to sandpaper the rolls from both sides to make them a bit shorter so they are not…
Simple modification to allow for access to screw holes on the right-side model.
The bracket linked on the website has a corner that protudes into the path of the head when it's at the top of the Z-axis. This version simply eliminates that corner so there's no interference.
Birdhouse pictured here was printed using Overture Super PLA+, and has a Blink outdoor camera mounted to the inside of the roof with double sided tape.
This is a modification of the 67.2mm foot from OloDeepdelver's FIFO Cat food Dispenser to have a 2x2 gridfinity base with magnet support. Original Model This is just the foot, to get the other parts of the model visit the original model…
This shift dial helps correctly position the idler pulley assembly. On some ACE Pro units, a small tolerance issue can cause the idler pulley to sit at a slightly incorrect angle, leading to repeated Error 11518 (filament clogging). A…
This is designed for the FT-82-43 torroid, which I got from Amazon - https://amzn.to/3KDiDdo A 150pf Capacitor. I got this kit - https://amzn.to/4orASAj 22 AWG magnet wire - https://amzn.to/4iwDZ8N BNC female connector chassis -…
I loved the Elephant Tape Dispenser pattern from SnapCount @SnapCount_1393724 but saw there were some changes needed. There was a recommended revision by Petros @Mach0gr to stretch the blade 120% and flip it around which worked well. The…
Recommended print settings for PETG parts Layer height: 0.2 mm Infill: 20% Infill pattern: Grid Perimeter: Min. 2 First and last layer: Min. 3
A small box with a lid modified to allow ease of opening with a thumb divot
Moved pass through more inline with outlets. Angled 45 to give better flow to my taste. I'm very new to designing stuff so not perfect but works fine for me
This is the usb Module I designed this for: BATIGE Square Type C 3.1 Car... https://www.amazon.com/dp/B0B284JR61?ref=ppx_pop_mob_ap_share This can be used for making a wired USB connection for CarPlay/Android Auto (my use case) . Or you…
The main difference is that I extended the stem 10mm so that the pug mount sits back further. I didn't like how sharply you had to bend the tool-head connector to plug it in on the original. I also cut one of the corners off to make its…
This is my modified version to fit an original (non-pro) Ender 3.
This is a remix of imototakashi no motor turn table handle to allow use of a drill or the handle knob
Slightly modified the original spool holder from John S. Raised the latch so the holder has support at the bottom from the panel. Also thinned the latch arms so they bend a bit easier without breaking. I stuck on some teflon tape to let…
Imported the Glock insert to Fusion360 and made 1mm shims inside to take up slack on Glock19 mag.
My partner designs costumes for plays, and when they complete one, they make a doll of one of the characters to commemorate it. One of these characters needed a machete, and there needed to be a way to attach it to the doll. I found this…
Kobra max OEM direct drive modified from original make to fit the wider tabs on some kobra maxes\ maker sure to check the original make of this remix
This is my attempt to improve Almondtofu's wonderful Coffee Block modular tamping station system. The main change is replacing the locking tabs on the blocks and side panels with female dovetail slots. These are then attached together…
This is a modified T-nut rail system profile designed for 20x20mm aluminum extrusion rails including the conntector, optimized for 3D printing. This design features thickened and reinforced internal connections to ensure structural…
I had the original hinges installed and really liked them. But, I installed a heater with the 7.5mm panel spacer that provides relief for the heater cables . After intalling the spacer on the left side of my printer ( my choice ), I…
A stackable calibration cat. Maintains the calibration dimensions from the original. This modei is original size, but can be rotated 90 degrees.
Two inserts with caps introduced for inserting weights used to balance car wheels
I modified Torstens lamp shade to fit my modified illumination spike
I used 12mm Birch Muliplex. Blue housings are PETG and the red grips are ASA.
I modified the spool holder from the AD5M Minimal DIY Enclosure by Doug Joseph (design8studio) to hold 2 spools. It will hold two 1kg spools. This is mostly helpful when doing quick filament changes so that you can have the next one ready…
Couldn't find a poop catcher for the Qidi Max 4 so I tinkercaded this up to be at least operational. It's not perfect but at least works. I haven't messed with the box portion, no idea if it'll work with this. (Mocked up the box portion…
had to make this my threads were messed up when it threw a red dot and ripped the threads so i rethreaded for a largeer screw will neew sanding to fit good update first one is two narrow for the pt140 so i made some changes and widend it…
I recently upgraded my MK3S+ with an MMU3 only to find that I had rather frequent issues with the MMU3 not being able to feed filament into the extruder. The filament would snag onto something inside the pneumatic fitting and just...not…
This is meant to look more realistic than the original model and I added grooves on the side, a bead at the tip, and a silencer. Enjoy making your Lucky 13s look better and cooler.
Hlavní změna spočívá v horní ploše krytu, kterou jsem upravil do kónusu s mírně zaoblenými hranami. Původní model je super, ale při opravdu krajní pozici ramene stále ještě docházelo k zachytávání svazku kabelů a PTFE. Díky kónusu se…
Modified mirrors for use with mirror foil. I used 1.2mm thick mirror foil
go to https://www.thingiverse.com/demolition88/designs because I said so.
The original model blocks some pedal outputs (e.g., Loop Station or digital delay units) because they feature multiple output jacks.
